Load data for .307 Win. + .308 | 110gr | Barnes TAC-X

.307 Win. cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:110 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:20"
Max. allowed Pressure:60,191 psi
Recommended Twist Rate:1:15.5

Load data in caliber .307 Win. with .308 | 110gr | Barnes TAC-X bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%53,708 psi89%2933 fps99.2%
Accurate 2015ᴾ<<locked>>100%41,495 psi69%2808 fps96.2%
Accurate LT-30<<locked>>98%53,722 psi89%2927 fps97.3%
ADI AR 2205<<locked>>84%52,852 psi88%2825 fps100%
ADI AR 2207<<locked>>96%51,576 psi86%2989 fps100%
ADI AR 2219<<locked>>98%50,821 psi84%3009 fps96.4%
Alliant AR-Compᴾ<<locked>>100%38,754 psi64%2828 fps97.9%
Alliant Reloder-10xᴾ<<locked>>100%48,573 psi81%2966 fps98.8%
Alliant Reloder-7<<locked>>96%54,331 psi90%2995 fps99.6%
Baschieri & Pellagri 106<<locked>>98%51,953 psi86%2910 fps97.3%
Hodgdon H322ᴾ<<locked>>100%48,472 psi81%2969 fps95.9%
Hodgdon H4198<<locked>>94%52,707 psi88%2930 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%30,269 psi50%1801 fps100%
IMR 4198ᴾ<<locked>>100%51,024 psi85%2963 fps99.6%
IMR 4227<<locked>>90%52,707 psi88%2923 fps100%
Lovex D060<<locked>>84%52,939 psi88%2963 fps99.6%
Lovex S053<<locked>>92%53,824 psi89%2923 fps100%
Norma 200<<locked>>98%51,706 psi86%3005 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,907 psi50%1844 fps100%
ReloadSwiss RS 36<<locked>>90%52,040 psi86%2953 fps100%
Shooters World Buffalo Rifle<<locked>>84%52,939 psi88%2963 fps99.6%
Shooters World SOCOM<<locked>>84%54,404 psi90%2940 fps99.9%
SNPE Vectan BA6 1/2<<locked>>96%54,360 psi90%2772 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%50,096 psi83%2976 fps97.3%
Vihtavuori N110<<locked>>86%52,823 psi88%2831 fps100%
Vihtavuori N120<<locked>>96%51,750 psi86%2943 fps100%
Vihtavuori N130ᴾ<<locked>>100%46,963 psi78%2867 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,766 psi59%2598 fps95.6%
Accurate 2015<<locked>>98%38,899 psi65%2756 fps95.4%
Accurate LT-30<<locked>>92%44,802 psi74%2772 fps95.3%
ADI AR 2205<<locked>>80%46,789 psi78%2730 fps100%
ADI AR 220731.6 gr80%31,024 psi52%2572 fps97.9%
ADI AR 2219<<locked>>96%47,398 psi79%2946 fps95.6%
Alliant AR-Comp<<locked>>94%32,140 psi53%2657 fps95.4%
Alliant Reloder-10x<<locked>>90%35,346 psi59%2697 fps95.6%
Alliant Reloder-7<<locked>>80%32,619 psi54%2566 fps95.2%
Baschieri & Pellagri 106<<locked>>92%42,786 psi71%2749 fps95.2%
Hodgdon H322<<locked>>98%45,556 psi76%2913 fps95.1%
Hodgdon H4198<<locked>>90%46,717 psi78%2825 fps95.1%
Hodgdon TrailBoss<<locked>>80%22,176 psi37%1614 fps100%
IMR 4198<<locked>>84%32,155 psi53%2562 fps95.3%
IMR 4227<<locked>>80%38,899 psi65%2671 fps98.8%
Lovex D060<<locked>>80%46,920 psi78%2854 fps99%
Lovex S053<<locked>>80%37,666 psi63%2641 fps100%
Norma 20034.7 gr84%32,764 psi54%2621 fps95.6%
ReloadSwiss RS 14<<locked>>80%21,785 psi36%1647 fps100%
ReloadSwiss RS 3632.9 gr80%37,913 psi63%2690 fps98.5%
Shooters World Buffalo Rifle<<locked>>80%46,920 psi78%2854 fps99%
Shooters World SOCOM<<locked>>80%47,355 psi79%2825 fps99.4%
SNPE Vectan BA6 1/2<<locked>>80%35,476 psi59%2474 fps100%
SNPE Vectan SP 3<<locked>>94%41,510 psi69%2812 fps95.2%
Vihtavuori N110<<locked>>80%44,498 psi74%2703 fps100%
Vihtavuori N120<<locked>>80%31,256 psi52%2549 fps99%
Vihtavuori N130<<locked>>92%36,608 psi61%2661 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .307 Win. loaded with the .308 | 110gr | Barnes TAC-X. ADI AR 2219 delivers the highest muzzle velocity at 3,009 fps; across all powders the maximum-charge window runs from 1,801 fps to 3,009 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (415 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. The 110.0 gr projectile in 0.308" calls for a 1:15.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, ReloadSwiss RS 36 rank at the top here: for .307 Win. with the .308 | 110gr | Barnes TAC-X they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data