Load data for .303 Savage + .311 | 130gr | Norma Soft Point

.303 Savage cartridge drawing
Norma logo

Load Specifications

Bullet Manufacturer:Norma
Bullet Weight:130 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:39,160 psi

Load data in caliber .303 Savage with .311 | 130gr | Norma Soft Point bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 4198 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>84%34,374 psi88%2395 fps99.4%
Alliant AR-Comp<<locked>>98%34,766 psi89%2474 fps97.6%
Alliant Reloder-10x<<locked>>90%33,881 psi87%2405 fps96.3%
Alliant Reloder-7<<locked>>82%33,852 psi86%2339 fps96.7%
Hodgdon TrailBossᴾ<<locked>>100%30,414 psi78%1578 fps100%
IMR 4198<<locked>>88%35,056 psi90%2372 fps97.4%
Norma 200<<locked>>86%34,171 psi87%2398 fps97.2%
ReloadSwiss RS 14ᴾ<<locked>>100%29,936 psi76%1614 fps100%
Vihtavuori N120<<locked>>84%34,621 psi88%2369 fps99.9%
Vihtavuori N130<<locked>>92%35,433 psi90%2379 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>80%30,269 psi77%2303 fps98.6%
Alliant AR-Comp30.4 gr92%28,979 psi74%2323 fps95.2%
Alliant Reloder-10x<<locked>>88%31,995 psi82%2362 fps95.6%
Alliant Reloder-7<<locked>>80%32,010 psi82%2297 fps96.1%
Hodgdon TrailBoss<<locked>>80%22,307 psi57%1407 fps100%
IMR 419825.2 gr82%29,660 psi76%2241 fps95.4%
Norma 200<<locked>>80%28,297 psi72%2257 fps95%
ReloadSwiss RS 149.4 gr80%22,075 psi56%1444 fps100%
Vihtavuori N120<<locked>>80%30,530 psi78%2280 fps99.4%
Vihtavuori N130<<locked>>90%33,170 psi85%2329 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for .303 Savage loaded with the .311 | 130gr | Norma Soft Point. Alliant AR-Comp delivers the highest muzzle velocity at 2,474 fps; across all powders the maximum-charge window runs from 1,578 fps to 2,474 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (270 MPa), the top charges use 76–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 4198, ReloadSwiss RS 14 rank at the top here: for .303 Savage with the .311 | 130gr | Norma Soft Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data