Load data for .303 Savage + .308 | 156gr | Reichenbeg HDB Ogival

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 156gr \| Reichenbeg HDB Ogival
Manufacturer SKU:	30815612
Bullet Weight:	156gr \| 10.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.252" \| 31.8mm
Caliber:	.303 Savage load data
Case Length (l3):	2.014" \| 51.2mm
Cartridge Length (C.O.L.):	2.482" \| 63.0mm
Seated Depth:	0.784" \| 19.9mm
Shank Seated Depth:	0.607" \| 15.4mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B10475_C391
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 42 loads in caliber .303 Savage with .308 | 156gr | Reichenbeg HDB Ogival bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	35128	90%	**49	100%
[ADI AR 2219]*	<<locked>>	88%	34751	89%	**59	94%
Accurate 2015	<<locked>>	95%	34722	89%	**52	97%
[Accurate 2495]*	<<locked>>	97%	27528	70%	**06	94%
Alliant AR-Comp	<<locked>>	97%	32779	84%	**72	98%
Alliant Reloder-10x	<<locked>>	91%	35027	89%	**72	98%
Alliant Reloder-7	<<locked>>	83%	34722	89%	**03	98%
Baschieri & Pellagri 106	<<locked>>	87%	34693	89%	**77	95%
[Hodgdon H322]*	<<locked>>	93%	34200	87%	**46	94%
[Hodgdon H335]*	<<locked>>	89%	34693	89%	**59	92%
[Hodgdon H4198]*	<<locked>>	83%	34142	87%	**41	93%
[IMR 3031]*	<<locked>>	97%	28834	74%	**70	92%
IMR 4198	<<locked>>	87%	33982	87%	**90	98%
Norma 200	<<locked>>	87%	33939	87%	**39	98%
[Rottweil R 901]*	<<locked>>	96%	34621	88%	**39	93%
[SNPE Vectan SP 10]*	<<locked>>	89%	35244	90%	**69	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	34461	88%	**80	92%
[Somchem S335]*	<<locked>>	97%	33489	86%	**93	93%
Vihtavuori N120	<<locked>>	87%	34679	89%	**03	100%
Vihtavuori N130	<<locked>>	92%	34505	88%	**03	97%
Vihtavuori N133	<<locked>>	97%	32387	83%	**64	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	30414	78%	**54	99%
[ADI AR 2219]*	<<locked>>	81%	27586	70%	**88	90%
[Accurate 2015]*	<<locked>>	81%	22684	58%	**80	91%
[Accurate 2495]*	<<locked>>	89%	21277	54%	**39	90%
[Alliant AR-Comp]*	<<locked>>	81%	20566	53%	**27	91%
[Alliant Reloder-10x]*	<<locked>>	81%	25469	65%	**59	94%
Alliant Reloder-7	<<locked>>	81%	32372	83%	**54	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	28863	74%	**52	92%
[Hodgdon H322]*	<<locked>>	87%	27934	71%	**01	90%
[Hodgdon H335]*	<<locked>>	85%	30429	78%	**64	90%
[Hodgdon H4198]*	<<locked>>	81%	31879	81%	**91	92%
[IMR 3031]*	<<locked>>	94%	26237	67%	**01	90%
IMR 4198	<<locked>>	81%	28718	73%	**75	96%
Norma 200	<<locked>>	81%	28805	74%	**28	97%
[Rottweil R 901]*	<<locked>>	90%	29240	75%	**21	90%
[SNPE Vectan SP 10]*	<<locked>>	84%	29863	76%	**57	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	29733	76%	**88	90%
[Somchem S335]*	<<locked>>	89%	26629	68%	**42	90%
Vihtavuori N120	<<locked>>	81%	28979	74%	**91	100%
[Vihtavuori N130]*	<<locked>>	81%	24352	62%	**77	93%
[Vihtavuori N133]*	<<locked>>	85%	23279	59%	**41	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data