top of page

Load data for .303 Savage + .308 | 150gr | Speer FN

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.303 Savage + .308 | 150gr | Speer FN

Load Specifications

Bullet:
.308 | 150gr | Speer FN
Manufacturer SKU:
2011
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.916" | 23.3mm
Caliber:
.303 Savage
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.448" | 11.4mm
Shank Seated Depth:
0.448" | 11.4mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B6148_C391

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 58 loads in caliber .303 Savage with .308 | 150gr | Speer FN bullet and 29 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2219
<<locked>>
84%
34229
87%
**80
95%
Accurate 2015
<<locked>>
89%
34476
88%
**70
98%
[Accurate 2460]*
<<locked>>
88%
34490
88%
**74
92%
Accurate 2495
<<locked>>
97%
34374
88%
**69
98%
[Accurate 2520]*
<<locked>>
95%
35099
90%
**39
93%
[Accurate 4064]*
<<locked>>
97%
28413
73%
**24
92%
Alliant AR-Comp 👍
<<locked>>
94%
35215
90%
**56
99%
Alliant Reloder-10x 👍
<<locked>>
87%
35215
90%
**97
99%
Baschieri & Pellagri 106
<<locked>>
83%
34722
89%
**01
96%
Hodgdon H322
<<locked>>
90%
34867
89%
**90
95%
[Hodgdon H335]*
<<locked>>
85%
34940
89%
**03
94%
IMR 3031
<<locked>>
96%
32634
83%
**03
95%
IMR 4198
<<locked>>
84%
34969
89%
**34
99%
[Lovex D073.4]*
<<locked>>
87%
34635
88%
**67
92%
[Lovex D073.5]*
<<locked>>
89%
34490
88%
**74
92%
[Lovex D073.6]*
<<locked>>
97%
34621
88%
**33
93%
[Norma 202]*
<<locked>>
95%
34824
89%
**06
94%
[ReloadSwiss RS 40]*
<<locked>>
87%
34447
88%
**60
92%
[Rottweil R 901]*
<<locked>>
92%
35201
90%
**77
94%
[SNPE Vectan SP 10]*
<<locked>>
84%
35143
90%
**03
94%
[SNPE Vectan Tubal 3000]*
<<locked>>
91%
34635
88%
**08
94%
[SNPE Vectan Tubal 5000]*
<<locked>>
96%
32358
83%
**75
94%
[Shooters World Match Rifle]*
<<locked>>
97%
34621
88%
**33
93%
Somchem S335
<<locked>>
93%
35041
89%
**47
95%
Vihtavuori N130
<<locked>>
88%
34156
87%
**21
98%
Vihtavuori N133
<<locked>>
94%
34185
87%
**31
97%
[Vihtavuori N135]*
<<locked>>
97%
27572
70%
**42
94%
[Vihtavuori N140]*
<<locked>>
96%
34113
87%
**60
94%
[Vihtavuori N540]*
<<locked>>
96%
34069
87%
**87
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2219]*
<<locked>>
81%
31430
80%
**15
94%
Accurate 2015
<<locked>>
81%
26281
67%
**83
95%
[Accurate 2460]*
<<locked>>
85%
30705
78%
**95
90%
[Accurate 2495]*
<<locked>>
81%
20044
51%
**88
90%
[Accurate 2520]*
<<locked>>
89%
28529
73%
**88
90%
[Accurate 4064]*
<<locked>>
93%
25121
64%
**36
90%
Alliant AR-Comp
<<locked>>
81%
23496
60%
**51
95%
Alliant Reloder-10x
<<locked>>
81%
29457
75%
**69
97%
Baschieri & Pellagri 106
<<locked>>
81%
32227
82%
**52
95%
[Hodgdon H322]*
<<locked>>
81%
26861
69%
**96
91%
[Hodgdon H335]*
<<locked>>
81%
30443
78%
**95
92%
[IMR 3031]*
<<locked>>
86%
23975
61%
**60
90%
IMR 4198
<<locked>>
81%
32198
82%
**75
98%
[Lovex D073.4]*
<<locked>>
84%
30864
79%
**82
90%
[Lovex D073.5]*
<<locked>>
85%
30705
78%
**95
90%
[Lovex D073.6]*
<<locked>>
91%
29138
74%
**08
90%
[Norma 202]*
<<locked>>
87%
26803
68%
**10
90%
[ReloadSwiss RS 40]*
<<locked>>
83%
29820
76%
**56
90%
[Rottweil R 901]*
<<locked>>
83%
27369
70%
**90
90%
[SNPE Vectan SP 10]*
<<locked>>
81%
31183
80%
**11
92%
[SNPE Vectan Tubal 3000]*
<<locked>>
84%
27224
70%
**44
90%
[SNPE Vectan Tubal 5000]*
<<locked>>
88%
25150
64%
**95
90%
[Shooters World Match Rifle]*
<<locked>>
91%
29138
74%
**08
90%
[Somchem S335]*
<<locked>>
82%
24947
64%
**08
91%
Vihtavuori N130
<<locked>>
81%
27949
71%
**80
96%
[Vihtavuori N133]*
<<locked>>
81%
23438
60%
**55
92%
[Vihtavuori N135]*
<<locked>>
90%
22640
58%
**98
90%
[Vihtavuori N140]*
<<locked>>
88%
26411
67%
**77
90%
[Vihtavuori N540]*
<<locked>>
89%
27369
70%
**23
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page