top of page

Load data for .303 Savage + .308 | 150gr | Speer Boat Tail Soft Point

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.303 Savage + .308 | 150gr | Speer Boat Tail Soft Point

Load Specifications

Bullet:
.308 | 150gr | Speer Boat Tail Soft Point
Manufacturer SKU:
2022
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.100" | 27.9mm
Caliber:
.303 Savage
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.632" | 16.0mm
Shank Seated Depth:
0.474" | 12.0mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B6147_C391

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 44 loads in caliber .303 Savage with .308 | 150gr | Speer Boat Tail Soft Point bullet and 22 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
83%
34519
88%
**18
100%
[ADI AR 2219]*
<<locked>>
87%
34751
89%
**47
94%
Accurate 2015
<<locked>>
93%
34476
88%
**34
97%
Accurate 2495
<<locked>>
96%
29530
75%
**34
95%
Alliant AR-Comp 👍
<<locked>>
97%
34853
89%
**06
99%
Alliant Reloder-10x 👍
<<locked>>
90%
35041
89%
**54
98%
Baschieri & Pellagri 106
<<locked>>
86%
34490
88%
**56
95%
[Hodgdon H322]*
<<locked>>
92%
34751
89%
**47
94%
[Hodgdon H335]*
<<locked>>
87%
34824
89%
**51
93%
[IMR 3031]*
<<locked>>
97%
30356
78%
**01
93%
IMR 4198
<<locked>>
87%
34867
89%
**92
99%
Norma 200
<<locked>>
85%
34389
88%
**28
98%
[Norma 202]*
<<locked>>
96%
32837
84%
**18
92%
[Rottweil R 901]*
<<locked>>
94%
34185
87%
**15
93%
[SNPE Vectan SP 10]*
<<locked>>
87%
34577
88%
**47
93%
[SNPE Vectan Tubal 3000]*
<<locked>>
95%
35056
90%
**78
93%
[SNPE Vectan Tubal 5000]*
<<locked>>
97%
30269
77%
**80
92%
[Somchem S335]*
<<locked>>
96%
35027
89%
**05
94%
Vihtavuori N120
<<locked>>
86%
35085
90%
**95
100%
Vihtavuori N130
<<locked>>
90%
34287
88%
**85
97%
Vihtavuori N133
<<locked>>
96%
33460
85%
**75
96%
[Vihtavuori N140]*
<<locked>>
96%
31546
81%
**62
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
32387
83%
**75
100%
[ADI AR 2219]*
<<locked>>
81%
28892
74%
**06
91%
[Accurate 2015]*
<<locked>>
81%
23989
61%
**88
92%
[Accurate 2495]*
<<locked>>
86%
20972
54%
**95
90%
[Alliant AR-Comp]*
<<locked>>
81%
22002
56%
**55
93%
Alliant Reloder-10x
<<locked>>
81%
27035
69%
**77
95%
[Baschieri & Pellagri 106]*
<<locked>>
81%
29820
76%
**57
93%
[Hodgdon H322]*
<<locked>>
84%
27122
69%
**64
90%
[Hodgdon H335]*
<<locked>>
83%
29936
76%
**39
90%
[IMR 3031]*
<<locked>>
92%
25933
66%
**80
90%
IMR 4198
<<locked>>
81%
29776
76%
**80
97%
Norma 200
<<locked>>
81%
30168
77%
**39
97%
[Norma 202]*
<<locked>>
92%
29283
75%
**36
90%
[Rottweil R 901]*
<<locked>>
88%
29298
75%
**03
90%
[SNPE Vectan SP 10]*
<<locked>>
82%
29617
76%
**33
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
88%
28732
73%
**41
90%
[SNPE Vectan Tubal 5000]*
<<locked>>
93%
26919
69%
**01
90%
[Somchem S335]*
<<locked>>
86%
25817
66%
**98
90%
Vihtavuori N120
<<locked>>
81%
30850
79%
**10
100%
[Vihtavuori N130]*
<<locked>>
81%
25715
66%
**91
94%
[Vihtavuori N133]*
<<locked>>
83%
23206
59%
**09
90%
[Vihtavuori N140]*
<<locked>>
93%
28906
74%
**96
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page