Load data for .303 Savage + .308 | 150gr | Nosler Partition Gold

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Nosler Partition Gold
Manufacturer SKU:	52200
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.100" \| 27.9mm
Caliber:	.303 Savage load data
Case Length (l3):	2.014" \| 51.2mm
Cartridge Length (C.O.L.):	2.482" \| 63.0mm
Seated Depth:	0.632" \| 16.0mm
Shank Seated Depth:	0.632" \| 16.0mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B4089_C391
Last updated:	2025-02-02

Load data for 42 loads in caliber .303 Savage with .308 | 150gr | Nosler Partition Gold bullet and 21 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	87%	35099	90%	**38	94%
Accurate 2015	<<locked>>	92%	35027	89%	**24	97%
Accurate 2495	<<locked>>	97%	30734	78%	**41	96%
Alliant AR-Comp 👍	<<locked>>	96%	34330	88%	**70	99%
Alliant Reloder-10x	<<locked>>	88%	34461	88%	**21	98%
Baschieri & Pellagri 106	<<locked>>	85%	34853	89%	**49	95%
[Hodgdon H322]*	<<locked>>	92%	34606	88%	**24	94%
[Hodgdon H335]*	<<locked>>	88%	35157	90%	**41	93%
[IMR 3031]*	<<locked>>	96%	30458	78%	**82	93%
IMR 4198	<<locked>>	86%	34505	88%	**69	98%
Norma 200	<<locked>>	84%	34258	87%	**05	98%
[Norma 202]*	<<locked>>	97%	34069	87%	**31	93%
[Rottweil R 901]*	<<locked>>	93%	33924	87%	**85	92%
[SNPE Vectan SP 10]*	<<locked>>	86%	34040	87%	**15	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	94%	35070	90%	**59	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30443	78%	**67	92%
[Somchem S335]*	<<locked>>	96%	34998	89%	**92	94%
Vihtavuori N120	<<locked>>	85%	35215	90%	**82	100%
Vihtavuori N130	<<locked>>	91%	35215	90%	**85	97%
Vihtavuori N133	<<locked>>	97%	34272	88%	**69	96%
[Vihtavuori N140]*	<<locked>>	96%	32271	82%	**56	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	29240	75%	**00	91%
[Accurate 2015]*	<<locked>>	81%	24555	63%	**82	92%
[Accurate 2495]*	<<locked>>	85%	21654	55%	**95	90%
[Alliant AR-Comp]*	<<locked>>	81%	22611	58%	**52	93%
Alliant Reloder-10x	<<locked>>	81%	27441	70%	**64	95%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30037	77%	**47	93%
[Hodgdon H322]*	<<locked>>	83%	27093	69%	**41	90%
[Hodgdon H335]*	<<locked>>	83%	30501	78%	**33	90%
[IMR 3031]*	<<locked>>	91%	26194	67%	**64	90%
IMR 4198	<<locked>>	81%	30269	77%	**77	97%
Norma 200	<<locked>>	81%	31372	80%	**42	97%
[Norma 202]*	<<locked>>	91%	29196	75%	**16	90%
[Rottweil R 901]*	<<locked>>	87%	29370	75%	**83	90%
[SNPE Vectan SP 10]*	<<locked>>	82%	30240	77%	**29	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	29776	76%	**51	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	27688	71%	**01	90%
[Somchem S335]*	<<locked>>	86%	26803	68%	**01	90%
Vihtavuori N120	<<locked>>	81%	31024	79%	**00	100%
[Vihtavuori N130]*	<<locked>>	81%	26585	68%	**91	94%
[Vihtavuori N133]*	<<locked>>	82%	23308	60%	**96	90%
[Vihtavuori N140]*	<<locked>>	93%	29515	75%	**93	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data