Load data for .303 Savage + .308 | 150gr | NorthFork Bonded Core

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| NorthFork Bonded Core
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.120" \| 28.4mm
Caliber:	.303 Savage load data
Case Length (l3):	2.014" \| 51.2mm
Cartridge Length (C.O.L.):	2.482" \| 63.0mm
Seated Depth:	0.652" \| 16.6mm
Shank Seated Depth:	0.652" \| 16.6mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B3916_C391
Last updated:	2025-01-01

Load data for 42 loads in caliber .303 Savage with .308 | 150gr | NorthFork Bonded Core bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	84%	34969	89%	**11	100%
[ADI AR 2219]*	<<locked>>	87%	34258	87%	**18	94%
Accurate 2015	<<locked>>	94%	35027	89%	**34	97%
Accurate 2495	<<locked>>	97%	28689	73%	**05	95%
Alliant AR-Comp	<<locked>>	97%	33968	87%	**67	98%
Alliant Reloder-10x	<<locked>>	90%	34998	89%	**38	98%
Baschieri & Pellagri 106	<<locked>>	86%	34722	89%	**46	95%
[Hodgdon H322]*	<<locked>>	93%	34258	87%	**18	94%
[Hodgdon H335]*	<<locked>>	89%	34838	89%	**38	93%
[Hodgdon H4198]*	<<locked>>	83%	34766	89%	**26	94%
[IMR 3031]*	<<locked>>	96%	29008	74%	**46	92%
IMR 4198	<<locked>>	87%	34098	87%	**65	98%
Norma 200	<<locked>>	86%	34635	88%	**21	98%
[Norma 202]*	<<locked>>	97%	32721	84%	**98	92%
[Rottweil R 901]*	<<locked>>	95%	34751	89%	**11	93%
[SNPE Vectan SP 10]*	<<locked>>	88%	34635	88%	**28	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	95%	34708	89%	**56	93%
[Somchem S335]*	<<locked>>	97%	34650	88%	**82	94%
Vihtavuori N120	<<locked>>	86%	34200	87%	**65	100%
Vihtavuori N130	<<locked>>	92%	34809	89%	**82	97%
Vihtavuori N133	<<locked>>	97%	33098	85%	**49	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31589	81%	**49	100%
[ADI AR 2219]*	<<locked>>	81%	28456	73%	**80	91%
[Accurate 2015]*	<<locked>>	81%	23438	60%	**62	92%
[Accurate 2495]*	<<locked>>	88%	21712	55%	**11	90%
[Alliant AR-Comp]*	<<locked>>	81%	21103	54%	**09	91%
[Alliant Reloder-10x]*	<<locked>>	81%	25860	66%	**34	94%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29109	74%	**24	92%
[Hodgdon H322]*	<<locked>>	85%	27528	70%	**54	90%
[Hodgdon H335]*	<<locked>>	84%	29994	77%	**23	90%
[Hodgdon H4198]*	<<locked>>	81%	32677	83%	**80	93%
[IMR 3031]*	<<locked>>	93%	26310	67%	**73	90%
IMR 4198	<<locked>>	81%	29066	74%	**51	97%
Norma 200	<<locked>>	81%	29573	76%	**13	97%
[Norma 202]*	<<locked>>	94%	29820	76%	**33	90%
[Rottweil R 901]*	<<locked>>	90%	29660	76%	**96	90%
[SNPE Vectan SP 10]*	<<locked>>	83%	29718	76%	**19	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	29269	75%	**41	90%
[Somchem S335]*	<<locked>>	88%	26789	68%	**11	90%
Vihtavuori N120	<<locked>>	81%	30052	77%	**80	100%
[Vihtavuori N130]*	<<locked>>	81%	25121	64%	**59	93%
[Vihtavuori N133]*	<<locked>>	84%	23337	60%	**06	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data