top of page

Load data for .303 Savage + .308 | 130gr | Barnes X BT

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.303 Savage + .308 | 130gr | Barnes X BT

Load Specifications

Bullet:
.308 | 130gr | Barnes X BT
Manufacturer SKU:
30808
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.070" | 27.2mm
Caliber:
.303 Savage
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.602" | 15.3mm
Shank Seated Depth:
0.502" | 12.7mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B597_C391

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 24 loads in caliber .303 Savage with .308 | 130gr | Barnes X BT bullet and 12 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
83%
34954
89%
**62
99%
Accurate 2015
<<locked>>
93%
34998
89%
**65
95%
[Accurate 2495]*
<<locked>>
96%
30284
77%
**62
93%
Alliant AR-Comp
<<locked>>
96%
34389
88%
**08
97%
Alliant Reloder-10x
<<locked>>
90%
35201
90%
**85
96%
[Baschieri & Pellagri 106]*
<<locked>>
85%
34577
88%
**74
93%
IMR 4198
<<locked>>
87%
35012
89%
**16
97%
Norma 200
<<locked>>
84%
34447
88%
**46
97%
[Somchem S335]*
<<locked>>
95%
34403
88%
**06
92%
Vihtavuori N120
<<locked>>
84%
34548
88%
**13
100%
Vihtavuori N130
<<locked>>
90%
34693
89%
**13
96%
[Vihtavuori N133]*
<<locked>>
96%
33808
86%
**87
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33156
85%
**16
99%
[Accurate 2015]*
<<locked>>
81%
25527
65%
**23
90%
[Accurate 2495]*
<<locked>>
90%
25730
66%
**34
90%
[Alliant AR-Comp]*
<<locked>>
82%
23656
60%
**83
90%
[Alliant Reloder-10x]*
<<locked>>
81%
27978
71%
**05
93%
[Baschieri & Pellagri 106]*
<<locked>>
81%
30284
77%
**65
90%
IMR 4198
<<locked>>
81%
30443
78%
**05
95%
Norma 200
<<locked>>
81%
32010
82%
**90
96%
[Somchem S335]*
<<locked>>
92%
31952
82%
**47
90%
Vihtavuori N120
<<locked>>
81%
31459
80%
**47
99%
[Vihtavuori N130]*
<<locked>>
81%
27006
69%
**19
92%
[Vihtavuori N133]*
<<locked>>
88%
27456
70%
**23
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page