top of page

Load data for .303 Savage + .308 | 130gr | Barnes TSX BT

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

.303 Savage + .308 | 130gr | Barnes TSX BT

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 130gr | Barnes TSX BT
Manufacturer SKU:
30345
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.083" | 27.5mm
Caliber:
.303 Savage load data
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.615" | 15.6mm
Shank Seated Depth:
0.490" | 12.4mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B599_C391
Last updated:
2025-01-01
Recommended Twist Rate:
1:14 - 1:11

Load data for 28 loads in caliber .303 Savage with .308 | 130gr | Barnes TSX BT bullet and 14 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
87%
34461
88%
**92
99%
[ADI AR 2219]*
<<locked>>
90%
34867
89%
**92
92%
Accurate 2015
<<locked>>
97%
34026
87%
**82
95%
Alliant AR-Comp
<<locked>>
97%
30589
78%
**46
95%
Alliant Reloder-10x
<<locked>>
94%
34664
89%
**08
96%
Alliant Reloder-7
<<locked>>
85%
34534
88%
**43
97%
[Baschieri & Pellagri 106]*
<<locked>>
89%
34563
88%
**03
93%
[Hodgdon H322]*
<<locked>>
96%
34867
89%
**92
92%
[Hodgdon H4198]*
<<locked>>
86%
34983
89%
**90
92%
IMR 4198
<<locked>>
90%
34301
88%
**36
97%
Norma 200
<<locked>>
89%
34301
88%
**92
97%
Vihtavuori N120 👍
<<locked>>
90%
34969
89%
**65
100%
Vihtavuori N130
<<locked>>
95%
34258
87%
**39
96%
[Vihtavuori N133]*
<<locked>>
96%
29617
76%
**24
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
28268
72%
**44
98%
[ADI AR 2219]*
<<locked>>
88%
31807
81%
**20
90%
[Accurate 2015]*
<<locked>>
87%
25179
64%
**69
91%
[Alliant AR-Comp]*
<<locked>>
87%
23279
59%
**16
90%
[Alliant Reloder-10x]*
<<locked>>
81%
23496
60%
**19
91%
Alliant Reloder-7
<<locked>>
81%
30545
78%
**47
95%
[Baschieri & Pellagri 106]*
<<locked>>
84%
30081
77%
**95
90%
[Hodgdon H322]*
<<locked>>
93%
31807
81%
**20
90%
[Hodgdon H4198]*
<<locked>>
83%
31981
82%
**21
90%
[IMR 4198]*
<<locked>>
81%
26687
68%
**42
93%
[Norma 200]*
<<locked>>
81%
26571
68%
**08
94%
Vihtavuori N120
<<locked>>
81%
27108
69%
**82
98%
[Vihtavuori N130]*
<<locked>>
83%
24149
62%
**87
91%
[Vihtavuori N133]*
<<locked>>
93%
27151
69%
**56
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page