top of page

Load data for .303 Savage + .308 | 125gr | Speer HP TNT

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.303 Savage + .308 | 125gr | Speer HP TNT

Load Specifications

Bullet:
.308 | 125gr | Speer HP TNT
Manufacturer SKU:
1986
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.920" | 23.4mm
Caliber:
.303 Savage load data
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.452" | 11.5mm
Shank Seated Depth:
0.452" | 11.5mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B6143_C391
Last updated:
2025-01-01

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 28 loads in caliber .303 Savage with .308 | 125gr | Speer HP TNT bullet and 14 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
86%
34896
89%
**84
99%
[ADI AR 2219]*
<<locked>>
89%
34563
88%
**77
92%
Accurate 2015
<<locked>>
95%
34606
88%
**80
95%
Alliant AR-Comp
<<locked>>
96%
32010
82%
**70
96%
Alliant Reloder-10x
<<locked>>
92%
34635
88%
**97
96%
Alliant Reloder-7
<<locked>>
84%
34708
89%
**28
97%
[Baschieri & Pellagri 106]*
<<locked>>
88%
34563
88%
**88
93%
[Hodgdon H322]*
<<locked>>
95%
34969
89%
**84
92%
[Hodgdon H4198]*
<<locked>>
84%
34258
87%
**59
92%
IMR 4198
<<locked>>
89%
34925
89%
**41
97%
Norma 200
<<locked>>
88%
34432
88%
**80
97%
Vihtavuori N120
<<locked>>
88%
34679
89%
**41
100%
Vihtavuori N130
<<locked>>
94%
35056
90%
**41
96%
[Vihtavuori N133]*
<<locked>>
96%
31169
80%
**49
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
29965
77%
**69
98%
[ADI AR 2219]*
<<locked>>
86%
31792
81%
**05
90%
[Accurate 2015]*
<<locked>>
84%
24149
62%
**08
90%
[Alliant AR-Comp]*
<<locked>>
85%
22684
58%
**78
90%
[Alliant Reloder-10x]*
<<locked>>
81%
24831
63%
**41
92%
Alliant Reloder-7
<<locked>>
81%
31850
81%
**62
96%
[Baschieri & Pellagri 106]*
<<locked>>
82%
28747
73%
**44
90%
[Hodgdon H322]*
<<locked>>
91%
31401
80%
**95
90%
[Hodgdon H4198]*
<<locked>>
81%
31227
80%
**90
90%
[IMR 4198]*
<<locked>>
81%
27644
71%
**51
94%
Norma 200
<<locked>>
81%
27963
71%
**20
95%
Vihtavuori N120
<<locked>>
81%
28224
72%
**90
99%
[Vihtavuori N130]*
<<locked>>
81%
23902
61%
**49
91%
[Vihtavuori N133]*
<<locked>>
91%
27122
69%
**38
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page