top of page

Load data for .303 Savage + .308 | 125gr | Sierra HPMK

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

.303 Savage + .308 | 125gr | Sierra HPMK

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 125gr | Sierra HPMK
Manufacturer SKU:
2121
Bullet Weight:
125gr | 8.1g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.180" | 30.0mm
Caliber:
.303 Savage load data
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.712" | 18.1mm
Shank Seated Depth:
0.712" | 18.1mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B5863_C391
Last updated:
2025-01-01

Load data for 20 loads in caliber .303 Savage with .308 | 125gr | Sierra HPMK bullet and 10 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
91%
35186
90%
**18
99%
Alliant Reloder-10x
<<locked>>
97%
33866
86%
**02
95%
Alliant Reloder-7
<<locked>>
89%
34853
89%
**56
95%
IMR 4198
<<locked>>
93%
34113
87%
**36
95%
Lovex S053
<<locked>>
83%
34679
89%
**10
100%
Norma 200
<<locked>>
93%
34447
88%
**11
96%
ReloadSwiss RS 36
<<locked>>
83%
34403
88%
**46
97%
SNPE Vectan BA6 1/2
<<locked>>
85%
34476
88%
**95
100%
Vihtavuori N120 👍
<<locked>>
93%
34621
88%
**72
99%
[Vihtavuori N130]*
<<locked>>
97%
33141
85%
**20
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
25730
66%
**92
96%
[Alliant Reloder-10x]*
<<locked>>
88%
25730
66%
**98
91%
[Alliant Reloder-7]*
<<locked>>
81%
27485
70%
**82
92%
[IMR 4198]*
<<locked>>
81%
24613
63%
**80
90%
Lovex S053
<<locked>>
81%
32198
82%
**60
99%
[Norma 200]*
<<locked>>
81%
23569
60%
**36
91%
ReloadSwiss RS 36
<<locked>>
81%
32068
82%
**90
96%
SNPE Vectan BA6 1/2
<<locked>>
81%
31009
79%
**33
100%
Vihtavuori N120
<<locked>>
81%
24801
63%
**29
96%
[Vihtavuori N130]*
<<locked>>
89%
26208
67%
**49
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page