Load data for .303 Savage + .308 | 125gr | Barnes X S

.303 Savage cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:125 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:39,160 psi
Recommended Twist Rate:1:15.0

Load data in caliber .303 Savage with .308 | 125gr | Barnes X S bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>84%34,127 psi87%2385 fps98.8%
Alliant AR-Comp<<locked>>98%34,809 psi89%2451 fps96.2%
Alliant Reloder-7<<locked>>82%34,389 psi88%2336 fps95.7%
Hodgdon TrailBossᴾ<<locked>>100%31,111 psi79%1585 fps100%
IMR 4198<<locked>>88%35,070 psi90%2359 fps96.3%
Norma 200<<locked>>86%34,621 psi88%2392 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%30,806 psi79%1621 fps100%
Vihtavuori N120<<locked>>84%34,330 psi88%2359 fps99.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
ADI AR 2207<<locked>>80%30,458 psi78%2297 fps97.9%
Alliant AR-Comp<<locked>>96%32,982 psi84%2405 fps95.4%
Alliant Reloder-7<<locked>>80%32,590 psi83%2293 fps95.1%
Hodgdon TrailBoss8.7 gr80%23,032 psi59%1414 fps100%
IMR 4198<<locked>>86%33,199 psi85%2316 fps95.6%
Norma 200<<locked>>84%32,851 psi84%2352 fps95.6%
ReloadSwiss RS 148.9 gr80%22,960 psi59%1450 fps100%
Vihtavuori N120<<locked>>80%30,661 psi78%2274 fps98.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for .303 Savage loaded with the .308 | 125gr | Barnes X S. Alliant AR-Comp delivers the highest muzzle velocity at 2,451 fps; across all powders the maximum-charge window runs from 1,585 fps to 2,451 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 8 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (270 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 125.0 gr projectile in 0.308" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .303 Savage with the .308 | 125gr | Barnes X S they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data