top of page

Load data for .303 Savage + .308 | 110gr | Speer TMJ

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.303 Savage + .308 | 110gr | Speer TMJ

Load Specifications

Bullet:
.308 | 110gr | Speer TMJ
Manufacturer SKU:
1846
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.676" | 17.2mm
Caliber:
.303 Savage
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.208" | 5.3mm
Shank Seated Depth:
0.208" | 5.3mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B6140_C391

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .303 Savage with .308 | 110gr | Speer TMJ bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
85%
34795
89%
**94
99%
Accurate 2015
<<locked>>
95%
35244
90%
**07
95%
Alliant AR-Comp
<<locked>>
97%
32996
84%
**03
96%
Alliant Reloder-10x
<<locked>>
92%
34809
89%
**10
96%
Alliant Reloder-7
<<locked>>
83%
34766
89%
**41
96%
[Baschieri & Pellagri 106]*
<<locked>>
88%
35172
90%
**05
93%
Hodgdon TrailBoss
<<locked>>
96%
28413
73%
**49
100%
IMR 4198
<<locked>>
88%
34534
88%
**41
96%
Norma 200
<<locked>>
88%
34983
89%
**07
97%
ReloadSwiss RS 14
<<locked>>
95%
27731
71%
**81
100%
Vihtavuori N120
<<locked>>
87%
34766
89%
**54
100%
Vihtavuori N130
<<locked>>
93%
35244
90%
**51
95%
[Vihtavuori N133]*
<<locked>>
96%
31517
80%
**56
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
30356
78%
**85
98%
[Accurate 2015]*
<<locked>>
86%
26078
67%
**57
90%
[Alliant AR-Comp]*
<<locked>>
87%
24366
62%
**21
90%
[Alliant Reloder-10x]*
<<locked>>
81%
25150
64%
**38
91%
Alliant Reloder-7
<<locked>>
81%
32053
82%
**75
95%
[Baschieri & Pellagri 106]*
<<locked>>
83%
30530
78%
**80
90%
Hodgdon TrailBoss
<<locked>>
86%
24468
62%
**57
100%
[IMR 4198]*
<<locked>>
81%
27978
71%
**51
93%
[Norma 200]*
<<locked>>
81%
28384
72%
**30
94%
ReloadSwiss RS 14
<<locked>>
81%
22089
56%
**40
100%
Vihtavuori N120
<<locked>>
81%
28906
74%
**10
99%
[Vihtavuori N130]*
<<locked>>
82%
24816
63%
**69
90%
[Vihtavuori N133]*
<<locked>>
92%
27833
71%
**48
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page