top of page

Load data for .303 Savage + .308 | 100gr | Speer RN PLI

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.303 Savage + .308 | 100gr | Speer RN PLI

Load Specifications

Bullet:
.308 | 100gr | Speer RN PLI
Manufacturer SKU:
1805
Bullet Weight:
100gr | 6.5g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
0.602" | 15.3mm
Caliber:
.303 Savage
Case Length (l3):
2.014" | 51.2mm
Cartridge Length (C.O.L.):
2.482" | 63.0mm
Seated Depth:
0.134" | 3.4mm
Shank Seated Depth:
0.134" | 3.4mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
39160 psi | 2700 bar
LID:
LID_B6137_C391

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 24 loads in caliber .303 Savage with .308 | 100gr | Speer RN PLI bullet and 12 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
89%
34214
87%
**38
98%
[Accurate 2015]*
<<locked>>
97%
32155
82%
**82
93%
[Alliant AR-Comp]*
<<locked>>
97%
29066
74%
**20
93%
Alliant Reloder-10x
<<locked>>
95%
34621
88%
**58
95%
Alliant Reloder-7
<<locked>>
88%
35143
90%
**05
96%
Hodgdon TrailBoss
<<locked>>
95%
26658
68%
**34
100%
IMR 4198
<<locked>>
91%
34418
88%
**85
95%
Norma 200
<<locked>>
91%
34330
88%
**41
96%
ReloadSwiss RS 14
<<locked>>
95%
26121
67%
**77
100%
SNPE Vectan BA6 1/2
<<locked>>
84%
34505
88%
**25
100%
Vihtavuori N120 👍
<<locked>>
91%
35186
90%
**22
99%
[Vihtavuori N130]*
<<locked>>
97%
35012
89%
**95
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
26469
68%
**21
96%
[Accurate 2015]*
<<locked>>
93%
27992
71%
**64
90%
[Alliant AR-Comp]*
<<locked>>
93%
26194
67%
**21
90%
[Alliant Reloder-10x]*
<<locked>>
87%
26165
67%
**18
90%
[Alliant Reloder-7]*
<<locked>>
81%
28384
72%
**18
93%
Hodgdon TrailBoss
<<locked>>
81%
21002
54%
**90
100%
[IMR 4198]*
<<locked>>
81%
25150
64%
**00
90%
[Norma 200]*
<<locked>>
81%
23888
61%
**36
90%
ReloadSwiss RS 14
<<locked>>
81%
20726
53%
**32
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
31705
81%
**69
100%
Vihtavuori N120
<<locked>>
81%
25222
64%
**46
96%
[Vihtavuori N130]*
<<locked>>
89%
26745
68%
**66
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page