Load Specifications
Load data in caliber .303 Savage with .308 | 100gr | Lapua OT Cutting Edge bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Vihtavuori N120 and SNPE Vectan BA6 1/2.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AR 2207 | <<locked>> | 92% | 34,185 psi | 87% | 2710 fps | 96.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 28,471 psi | 73% | 1775 fps | 100% |
| Lovex S053 | <<locked>> | 84% | 33,663 psi | 86% | 2598 fps | 98.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 27,760 psi | 71% | 1814 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 88% | 35,244 psi | 90% | 2533 fps | 100% |
| Vihtavuori N120 | <<locked>> | 92% | 34,621 psi | 88% | 2684 fps | 98.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AR 2207 | 27.8 gr | 88% | 30,153 psi | 77% | 2602 fps | 95.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,682 psi | 53% | 1585 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 29,675 psi | 76% | 2497 fps | 97.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 20,305 psi | 52% | 1624 fps | 100% |
| SNPE Vectan BA6 1/2 | 22.2 gr | 80% | 28,384 psi | 72% | 2379 fps | 100% |
| Vihtavuori N120 | 26.5 gr | 84% | 27,079 psi | 69% | 2477 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for .303 Savage loaded with the .308 | 100gr | Lapua OT Cutting Edge. ADI AR 2207 delivers the highest muzzle velocity at 2,710 fps; across all powders the maximum-charge window runs from 1,775 fps to 2,710 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (270 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Vihtavuori N120, SNPE Vectan BA6 1/2 rank at the top here: for .303 Savage with the .308 | 100gr | Lapua OT Cutting Edge they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.