
Load Specifications
Load data in caliber .300 Savage with .308 | 145gr | SUS-TAC HPT bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H335 and Hodgdon H322.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 44,947 psi | 85% | 2454 fps | 99.8% |
| Accurate 2015 | <<locked>> | 96% | 45,266 psi | 86% | 2539 fps | 99.5% |
| Accurate 2460 | <<locked>> | 94% | 46,499 psi | 88% | 2579 fps | 97.7% |
| Accurate 2495ᴾ | <<locked>> | 100% | 39,088 psi | 74% | 2507 fps | 99% |
| Accurate 2520 | <<locked>> | 98% | 46,470 psi | 88% | 2618 fps | 97.3% |
| Accurate 4064ᴾ | <<locked>> | 100% | 36,405 psi | 69% | 2467 fps | 96.1% |
| Accurate LT-30 | <<locked>> | 88% | 46,035 psi | 87% | 2467 fps | 98.7% |
| Accurate LT-32 | <<locked>> | 88% | 46,528 psi | 88% | 2474 fps | 97.2% |
| ADI AR 2207 | <<locked>> | 86% | 45,469 psi | 86% | 2513 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 46,441 psi | 88% | 2598 fps | 98.7% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 47,369 psi | 89% | 2654 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 92% | 45,832 psi | 87% | 2562 fps | 99.9% |
| Alliant Reloder-7 | <<locked>> | 86% | 47,152 psi | 89% | 2523 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 47,108 psi | 89% | 2507 fps | 99.1% |
| Hodgdon Benchmark | <<locked>> | 96% | 47,732 psi | 90% | 2549 fps | 96.2% |
| Hodgdon BL-C2ᴾ | <<locked>> | 100% | 47,601 psi | 90% | 2654 fps | 96.3% |
| Hodgdon H322 | <<locked>> | 92% | 44,947 psi | 85% | 2575 fps | 98.5% |
| Hodgdon H335 | <<locked>> | 92% | 45,876 psi | 87% | 2592 fps | 97.8% |
| Hodgdon H4198 | <<locked>> | 84% | 45,005 psi | 85% | 2464 fps | 98.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,343 psi | 61% | 1575 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 44,773 psi | 85% | 2631 fps | 99.1% |
| IMR 4198 | <<locked>> | 92% | 47,863 psi | 90% | 2549 fps | 100% |
| Lovex D073.4 | <<locked>> | 88% | 47,311 psi | 89% | 2595 fps | 97.2% |
| Lovex D073.5 | <<locked>> | 94% | 46,847 psi | 88% | 2582 fps | 96.4% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 43,903 psi | 83% | 2589 fps | 96.7% |
| Lovex S053 | <<locked>> | 82% | 47,137 psi | 89% | 2441 fps | 100% |
| Norma 200 | <<locked>> | 88% | 45,948 psi | 87% | 2546 fps | 100% |
| Norma 202ᴾ | <<locked>> | 100% | 45,716 psi | 86% | 2592 fps | 97.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,039 psi | 61% | 1608 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 23,554 psi | 44% | 1427 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 47,819 psi | 90% | 2516 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 94% | 47,587 psi | 90% | 2595 fps | 97.1% |
| Rottweil R 901 | <<locked>> | 98% | 47,355 psi | 89% | 2582 fps | 97.8% |
| Shooters World AR Plus | <<locked>> | 88% | 47,311 psi | 89% | 2595 fps | 97.2% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 43,903 psi | 83% | 2589 fps | 96.7% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 45,759 psi | 86% | 2280 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 46,760 psi | 88% | 2598 fps | 97.8% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 46,891 psi | 89% | 2572 fps | 99.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 46,717 psi | 88% | 2513 fps | 97.8% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 39,653 psi | 75% | 2408 fps | 97.3% |
| Somchem S335ᴾ | <<locked>> | 100% | 47,819 psi | 90% | 2556 fps | 98.7% |
| Vihtavuori N120 | <<locked>> | 86% | 45,629 psi | 86% | 2474 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 46,615 psi | 88% | 2520 fps | 99.9% |
| Vihtavuori N133 | <<locked>> | 98% | 45,876 psi | 87% | 2516 fps | 99.5% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 40,495 psi | 76% | 2516 fps | 99.1% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 43,294 psi | 82% | 2523 fps | 97.6% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 41,858 psi | 79% | 2513 fps | 96.7% |
| Winchester 748 | <<locked>> | 98% | 45,600 psi | 86% | 2615 fps | 96% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 42,105 psi | 80% | 2408 fps | 99.6% |
| Accurate 2015 | <<locked>> | 80% | 27,311 psi | 52% | 2169 fps | 95% |
| Accurate 2460 | <<locked>> | 88% | 38,130 psi | 72% | 2431 fps | 95.6% |
| Accurate 2495 | <<locked>> | 88% | 26,078 psi | 49% | 2218 fps | 95.1% |
| Accurate 2520 | <<locked>> | 92% | 37,855 psi | 72% | 2467 fps | 95% |
| Accurate 4064 | <<locked>> | 98% | 34,040 psi | 64% | 2418 fps | 95.3% |
| Accurate LT-30 | <<locked>> | 80% | 36,114 psi | 68% | 2287 fps | 96.6% |
| Accurate LT-32 | <<locked>> | 82% | 38,943 psi | 74% | 2339 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 38,058 psi | 72% | 2392 fps | 100% |
| ADI AR 2219 | 32 gr | 80% | 33,417 psi | 63% | 2343 fps | 95.4% |
| Alliant AR-Comp | <<locked>> | 80% | 25,324 psi | 48% | 2178 fps | 96.7% |
| Alliant Reloder-10x | <<locked>> | 80% | 31,676 psi | 60% | 2290 fps | 97.9% |
| Alliant Reloder-7 | <<locked>> | 80% | 39,436 psi | 74% | 2392 fps | 99.6% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 34,142 psi | 64% | 2270 fps | 96.3% |
| Hodgdon Benchmark | <<locked>> | 94% | 45,208 psi | 85% | 2507 fps | 95.6% |
| Hodgdon BL-C2 | <<locked>> | 98% | 44,179 psi | 83% | 2595 fps | 95.4% |
| Hodgdon H322 | 31.7 gr | 82% | 32,561 psi | 62% | 2323 fps | 95% |
| Hodgdon H335 | 35.6 gr | 86% | 37,536 psi | 71% | 2438 fps | 95.6% |
| Hodgdon H4198 | <<locked>> | 80% | 39,784 psi | 75% | 2369 fps | 97% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,569 psi | 45% | 1398 fps | 100% |
| IMR 3031 | <<locked>> | 88% | 30,821 psi | 58% | 2336 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 33,750 psi | 64% | 2290 fps | 99.1% |
| Lovex D073.4 | <<locked>> | 84% | 41,321 psi | 78% | 2493 fps | 95.8% |
| Lovex D073.5 | <<locked>> | 92% | 43,424 psi | 82% | 2526 fps | 95.6% |
| Lovex D073.6 | <<locked>> | 96% | 38,290 psi | 72% | 2487 fps | 95.1% |
| Lovex S053 | <<locked>> | 80% | 44,454 psi | 84% | 2402 fps | 100% |
| Norma 200 | <<locked>> | 80% | 35,853 psi | 68% | 2365 fps | 99.3% |
| Norma 202 | <<locked>> | 92% | 35,679 psi | 67% | 2405 fps | 95.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,467 psi | 44% | 1434 fps | 100% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 17,390 psi | 33% | 1273 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 44,788 psi | 85% | 2470 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 90% | 41,800 psi | 79% | 2493 fps | 95.7% |
| Rottweil R 901 | <<locked>> | 90% | 37,289 psi | 70% | 2398 fps | 95.4% |
| Shooters World AR Plus | <<locked>> | 84% | 41,321 psi | 78% | 2493 fps | 95.8% |
| Shooters World Match Rifle | <<locked>> | 96% | 38,290 psi | 72% | 2487 fps | 95.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,060 psi | 78% | 2215 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 35,882 psi | 68% | 2395 fps | 95% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 32,343 psi | 61% | 2290 fps | 96.1% |
| SNPE Vectan Tubal 3000 | <<locked>> | 90% | 36,666 psi | 69% | 2333 fps | 95.2% |
| SNPE Vectan Tubal 5000 | <<locked>> | 94% | 33,069 psi | 62% | 2274 fps | 95.2% |
| Somchem S335 | <<locked>> | 88% | 33,170 psi | 63% | 2283 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 38,232 psi | 72% | 2356 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 30,589 psi | 58% | 2211 fps | 97.3% |
| Vihtavuori N133 | <<locked>> | 82% | 28,224 psi | 53% | 2165 fps | 95.2% |
| Vihtavuori N135 | <<locked>> | 88% | 27,963 psi | 53% | 2238 fps | 95.5% |
| Vihtavuori N140 | <<locked>> | 94% | 35,911 psi | 68% | 2385 fps | 95.5% |
| Vihtavuori N540 | <<locked>> | 96% | 36,840 psi | 70% | 2418 fps | 95.2% |
| Winchester 748 | <<locked>> | 96% | 42,801 psi | 81% | 2562 fps | 95.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .300 Savage loaded with the .308 | 145gr | SUS-TAC HPT. Alliant AR-Comp delivers the highest muzzle velocity at 2,654 fps; across all powders the maximum-charge window runs from 1,427 fps to 2,654 fps. Accurate 2495 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (365 MPa), the top charges use 44–90 %, leaving at least 10 % headroom. The 145.0 gr projectile in 0.308" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H335, Hodgdon H322 rank at the top here: for .300 Savage with the .308 | 145gr | SUS-TAC HPT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.