
Load Specifications
Load data in caliber .300 Savage with .308 | 123gr | Sako Gamehead bullet and 36 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H322 and Alliant AR-Comp.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 46,833 psi | 88% | 2736 fps | 99.6% |
| Accurate 2015 | <<locked>> | 98% | 46,717 psi | 88% | 2818 fps | 99.1% |
| Accurate 2460 | <<locked>> | 94% | 45,252 psi | 85% | 2808 fps | 96.3% |
| Accurate 2495ᴾ | <<locked>> | 100% | 37,608 psi | 71% | 2720 fps | 97.9% |
| Accurate LT-30 | <<locked>> | 90% | 47,747 psi | 90% | 2746 fps | 98.2% |
| Accurate LT-32 | <<locked>> | 88% | 45,498 psi | 86% | 2703 fps | 95.8% |
| ADI AR 2207 | <<locked>> | 88% | 46,992 psi | 89% | 2805 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 45,121 psi | 85% | 2831 fps | 97.6% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 46,035 psi | 87% | 2897 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 94% | 47,456 psi | 90% | 2851 fps | 99.8% |
| Alliant Reloder-7 | <<locked>> | 86% | 45,890 psi | 87% | 2762 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 46,021 psi | 87% | 2733 fps | 98.2% |
| Hodgdon H322 | <<locked>> | 94% | 46,514 psi | 88% | 2858 fps | 97.8% |
| Hodgdon H335 | <<locked>> | 94% | 47,456 psi | 90% | 2871 fps | 97% |
| Hodgdon H4198 | <<locked>> | 86% | 46,920 psi | 89% | 2749 fps | 97.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,821 psi | 60% | 1752 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 43,468 psi | 82% | 2861 fps | 98% |
| IMR 4198 | <<locked>> | 92% | 46,340 psi | 88% | 2789 fps | 99.9% |
| IMR 4227 | <<locked>> | 82% | 46,833 psi | 88% | 2726 fps | 100% |
| Lovex S053 | <<locked>> | 82% | 45,992 psi | 87% | 2687 fps | 100% |
| Norma 200 | <<locked>> | 90% | 47,529 psi | 90% | 2835 fps | 99.9% |
| Norma 202ᴾ | <<locked>> | 100% | 44,527 psi | 84% | 2822 fps | 96.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,705 psi | 60% | 1795 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 46,398 psi | 88% | 2756 fps | 100% |
| Rottweil R 901 | <<locked>> | 98% | 45,963 psi | 87% | 2808 fps | 96.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 47,108 psi | 89% | 2556 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 45,643 psi | 86% | 2831 fps | 96.5% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 45,629 psi | 86% | 2808 fps | 98.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 45,469 psi | 86% | 2736 fps | 96.4% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 38,595 psi | 73% | 2618 fps | 95.8% |
| Somchem S335ᴾ | <<locked>> | 100% | 46,427 psi | 88% | 2782 fps | 97.7% |
| Vihtavuori N120 | <<locked>> | 88% | 47,123 psi | 89% | 2759 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 45,556 psi | 86% | 2756 fps | 99.5% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 47,297 psi | 89% | 2792 fps | 99.1% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 39,218 psi | 74% | 2733 fps | 98.1% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 42,206 psi | 80% | 2746 fps | 96.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 41,002 psi | 77% | 2631 fps | 98.9% |
| Accurate 2015 | <<locked>> | 86% | 31,908 psi | 60% | 2510 fps | 95.6% |
| Accurate 2460 | <<locked>> | 92% | 42,279 psi | 80% | 2753 fps | 95.5% |
| Accurate 2495 | <<locked>> | 94% | 30,690 psi | 58% | 2559 fps | 95.7% |
| Accurate LT-30 | <<locked>> | 80% | 35,360 psi | 67% | 2500 fps | 95.1% |
| Accurate LT-32 | <<locked>> | 86% | 42,917 psi | 81% | 2654 fps | 95.1% |
| ADI AR 2207 | <<locked>> | 80% | 36,709 psi | 69% | 2615 fps | 100% |
| ADI AR 2219 | 37.3 gr | 84% | 36,854 psi | 70% | 2654 fps | 95.2% |
| Alliant AR-Comp | 34.2 gr | 82% | 26,121 psi | 49% | 2415 fps | 95.5% |
| Alliant Reloder-10x | <<locked>> | 80% | 30,690 psi | 58% | 2493 fps | 96.4% |
| Alliant Reloder-7 | <<locked>> | 80% | 38,174 psi | 72% | 2612 fps | 98.9% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 35,607 psi | 67% | 2530 fps | 95.5% |
| Hodgdon H322 | 37.9 gr | 88% | 38,537 psi | 73% | 2694 fps | 95.8% |
| Hodgdon H335 | <<locked>> | 90% | 41,611 psi | 79% | 2759 fps | 95.5% |
| Hodgdon H4198 | <<locked>> | 80% | 38,957 psi | 74% | 2592 fps | 95.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,409 psi | 44% | 1565 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 33,982 psi | 64% | 2644 fps | 95.1% |
| IMR 4198 | <<locked>> | 80% | 32,779 psi | 62% | 2503 fps | 98% |
| IMR 4227 | <<locked>> | 80% | 44,034 psi | 83% | 2680 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 43,250 psi | 82% | 2641 fps | 100% |
| Norma 200 | <<locked>> | 80% | 34,766 psi | 66% | 2579 fps | 98.4% |
| Norma 202 | <<locked>> | 98% | 41,640 psi | 79% | 2762 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,192 psi | 44% | 1601 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 43,714 psi | 83% | 2710 fps | 100% |
| Rottweil R 901 | <<locked>> | 94% | 40,915 psi | 77% | 2710 fps | 95.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 40,205 psi | 76% | 2448 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 86% | 40,030 psi | 76% | 2720 fps | 95% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 33,388 psi | 63% | 2546 fps | 95.1% |
| SNPE Vectan Tubal 3000 | <<locked>> | 94% | 40,219 psi | 76% | 2638 fps | 95% |
| SNPE Vectan Tubal 5000 | <<locked>> | 98% | 36,376 psi | 69% | 2572 fps | 95% |
| Somchem S335 | <<locked>> | 92% | 36,622 psi | 69% | 2589 fps | 95.1% |
| Vihtavuori N120 | <<locked>> | 80% | 36,898 psi | 70% | 2579 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 29,718 psi | 56% | 2411 fps | 95.7% |
| Vihtavuori N133 | <<locked>> | 88% | 32,837 psi | 62% | 2500 fps | 95.7% |
| Vihtavuori N135 | <<locked>> | 92% | 30,777 psi | 58% | 2533 fps | 95.3% |
| Vihtavuori N140 | <<locked>> | 98% | 39,465 psi | 75% | 2690 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 36 powders for .300 Savage loaded with the .308 | 123gr | Sako Gamehead. Alliant AR-Comp delivers the highest muzzle velocity at 2,897 fps; across all powders the maximum-charge window runs from 1,752 fps to 2,897 fps. Accurate 2495 gives the best case fill at 100 %, and 36 of the 36 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (365 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H322, Alliant AR-Comp rank at the top here: for .300 Savage with the .308 | 123gr | Sako Gamehead they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.