Load data for .300 Savage + .308 | 115gr | Lehigh Defense Controlled Chaos

.300 Savage cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:115 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.87"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:52.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:13.0

Load data in caliber .300 Savage with .308 | 115gr | Lehigh Defense Controlled Chaos bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%46,775 psi88%2808 fps99.2%
Accurate 2015ᴾ<<locked>>100%45,440 psi86%2871 fps98.3%
Accurate LT-30<<locked>>92%47,427 psi90%2808 fps97.3%
ADI AR 2207<<locked>>90%46,093 psi87%2874 fps100%
ADI AR 2219<<locked>>94%47,297 psi89%2940 fps97%
Alliant AR-Compᴾ<<locked>>100%41,814 psi79%2890 fps99.5%
Alliant Reloder-10x<<locked>>96%46,166 psi87%2907 fps99.2%
Alliant Reloder-7<<locked>>88%45,179 psi85%2825 fps99.3%
Baschieri & Pellagri 106<<locked>>92%45,643 psi86%2795 fps97.2%
Hodgdon H322ᴾ<<locked>>100%47,297 psi89%2940 fps97%
Hodgdon H4198<<locked>>90%46,151 psi87%2802 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%31,082 psi59%1791 fps100%
IMR 4198<<locked>>94%45,745 psi86%2854 fps99.6%
IMR 4227<<locked>>84%46,702 psi88%2802 fps100%
Lovex S053<<locked>>84%45,266 psi86%2756 fps100%
Norma 200<<locked>>92%46,528 psi88%2897 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,893 psi58%1834 fps100%
ReloadSwiss RS 36<<locked>>84%46,050 psi87%2828 fps100%
SNPE Vectan BA6 1/2<<locked>>88%46,601 psi88%2631 fps100%
SNPE Vectan SP 3<<locked>>96%47,282 psi89%2910 fps97.9%
Somchem S335ᴾ<<locked>>100%42,902 psi81%2782 fps95.8%
Vihtavuori N120<<locked>>90%46,282 psi87%2831 fps100%
Vihtavuori N130<<locked>>98%47,297 psi89%2858 fps99.1%
Vihtavuori N133ᴾ<<locked>>100%43,526 psi82%2799 fps97.7%
Vihtavuori N135ᴾ<<locked>>100%35,781 psi68%2726 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,232 psi72%2641 fps97.6%
Accurate 2015<<locked>>92%35,085 psi66%2657 fps95.7%
Accurate LT-30<<locked>>86%39,639 psi75%2657 fps95.3%
ADI AR 220731.4 gr80%33,808 psi64%2625 fps99.4%
ADI AR 2219<<locked>>90%41,553 psi78%2828 fps95.5%
Alliant AR-Comp<<locked>>88%28,761 psi54%2559 fps95.6%
Alliant Reloder-10x32.5 gr82%29,994 psi57%2546 fps95%
Alliant Reloder-7<<locked>>80%35,404 psi67%2621 fps97.5%
Baschieri & Pellagri 106<<locked>>86%37,652 psi71%2638 fps95%
Hodgdon H322<<locked>>96%41,829 psi79%2831 fps95.6%
Hodgdon H4198<<locked>>88%43,424 psi82%2749 fps95.7%
Hodgdon TrailBoss<<locked>>80%22,872 psi43%1601 fps100%
IMR 4198<<locked>>80%30,487 psi58%2503 fps96.1%
IMR 4227<<locked>>80%41,147 psi78%2700 fps99.7%
Lovex S053<<locked>>80%40,350 psi76%2667 fps100%
Norma 20032.9 gr80%31,937 psi60%2585 fps96.7%
ReloadSwiss RS 14<<locked>>80%22,611 psi43%1637 fps100%
ReloadSwiss RS 36<<locked>>80%40,741 psi77%2730 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%37,797 psi71%2484 fps100%
SNPE Vectan SP 3<<locked>>88%36,927 psi70%2700 fps95.2%
Somchem S335<<locked>>98%40,132 psi76%2726 fps95%
Vihtavuori N120<<locked>>80%34,011 psi64%2598 fps99.9%
Vihtavuori N130<<locked>>84%30,821 psi58%2507 fps95%
Vihtavuori N133<<locked>>92%34,214 psi65%2598 fps95%
Vihtavuori N135<<locked>>98%33,620 psi64%2671 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 53 powders for .300 Savage loaded with the .308 | 115gr | Lehigh Defense Controlled Chaos. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 3,005 fps; across all powders the maximum-charge window runs from 1,791 fps to 3,005 fps. Accurate 2015 gives the best case fill at 100 %, and 53 of the 53 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 115.0 gr projectile in 0.308" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, ADI AR 2207 rank at the top here: for .300 Savage with the .308 | 115gr | Lehigh Defense Controlled Chaos they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2520, Accurate LT-32, ADI Benchmark 8208 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data