Load data for .300 CR + .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP

.300 CR cartridge drawing
GM Geschoss-Manufaktur logo

Load Specifications

Bullet Manufacturer:GM Geschoss-Manufaktur
Bullet Weight:120 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:53 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:62,366 psi
Recommended Twist Rate:1:11.5

Load data in caliber .300 CR with .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, SNPE Vectan SP 10 and Shooters World AR Plus.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%54,143 psi87%2927 fps100%
Accurate 2015ᴾ<<locked>>100%46,224 psi74%2890 fps99.2%
Accurate 2460ᴾ<<locked>>100%51,590 psi83%2995 fps97.7%
Accurate 2495ᴾ<<locked>>100%33,852 psi54%2726 fps97.1%
Accurate 2520ᴾ<<locked>>100%44,715 psi72%2920 fps95.9%
Accurate LT-30<<locked>>96%54,418 psi87%2927 fps99.1%
Accurate LT-32<<locked>>96%55,013 psi88%2936 fps97.7%
ADI AR 2205<<locked>>84%56,217 psi90%2831 fps100%
ADI AR 2207<<locked>>94%53,345 psi86%2982 fps100%
ADI AR 2219<<locked>>98%55,593 psi89%3084 fps99.2%
Alliant AR-Compᴾ<<locked>>100%42,627 psi68%2917 fps100%
Alliant Reloder-10xᴾ<<locked>>100%53,272 psi85%3028 fps100%
Alliant Reloder-7<<locked>>94%55,492 psi89%2992 fps100%
Baschieri & Pellagri 106<<locked>>98%56,333 psi90%2969 fps99.5%
Hodgdon CFE BLK<<locked>>82%55,114 psi88%3002 fps95.9%
Hodgdon H322ᴾ<<locked>>100%53,403 psi86%3051 fps99%
Hodgdon H335ᴾ<<locked>>100%54,853 psi88%3074 fps98.4%
Hodgdon H4198<<locked>>92%53,432 psi86%2933 fps98.6%
Hodgdon TrailBossᴾ<<locked>>100%31,299 psi50%1788 fps100%
IMR 3031ᴾ<<locked>>100%40,582 psi65%2884 fps97.5%
IMR 4198ᴾ<<locked>>100%55,230 psi89%3005 fps100%
IMR 4227<<locked>>88%53,577 psi86%2907 fps100%
Lovex D060<<locked>>84%56,434 psi90%2995 fps100%
Lovex D073.4<<locked>>94%53,098 psi85%3025 fps97.3%
Lovex D073.5ᴾ<<locked>>100%52,098 psi84%2995 fps96.5%
Lovex S053<<locked>>90%54,505 psi87%2890 fps100%
Norma 200<<locked>>96%53,316 psi85%3009 fps100%
Norma 202ᴾ<<locked>>100%41,205 psi66%2838 fps95.7%
ReloadSwiss RS 14ᴾ<<locked>>100%30,748 psi49%1824 fps100%
ReloadSwiss RS 36<<locked>>90%56,246 psi90%2986 fps100%
ReloadSwiss RS 40ᴾ<<locked>>100%52,852 psi85%3015 fps97.1%
Rottweil R 901ᴾ<<locked>>100%45,121 psi72%2881 fps96.5%
Shooters World AR Plus<<locked>>94%53,098 psi85%3025 fps97.3%
Shooters World Buffalo Rifle<<locked>>84%56,434 psi90%2995 fps100%
Shooters World SOCOM<<locked>>82%54,476 psi87%2917 fps100%
SNPE Vectan BA6 1/2<<locked>>94%55,114 psi88%2733 fps100%
SNPE Vectan SP 10<<locked>>98%56,043 psi90%3087 fps98.5%
SNPE Vectan SP 3ᴾ<<locked>>100%54,853 psi88%3038 fps99.6%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%45,368 psi73%2812 fps96.5%
Somchem S335ᴾ<<locked>>100%43,497 psi70%2808 fps97.2%
Vihtavuori N110<<locked>>84%53,621 psi86%2792 fps100%
Vihtavuori N120<<locked>>94%53,447 psi86%2930 fps100%
Vihtavuori N130ᴾ<<locked>>100%51,184 psi82%2927 fps99.9%
Vihtavuori N133ᴾ<<locked>>100%44,338 psi71%2818 fps98.8%
Vihtavuori N135ᴾ<<locked>>100%36,303 psi58%2753 fps97.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,740 psi62%2664 fps98.7%
Accurate 2015<<locked>>88%31,270 psi50%2579 fps95.6%
Accurate 2460<<locked>>94%41,930 psi67%2828 fps95.6%
Accurate 2495<<locked>>96%29,240 psi47%2612 fps95.4%
Accurate 2520<<locked>>98%41,481 psi67%2861 fps95%
Accurate LT-30<<locked>>82%35,317 psi57%2572 fps95.2%
Accurate LT-32<<locked>>88%43,250 psi69%2736 fps95.3%
ADI AR 2205<<locked>>80%49,792 psi80%2743 fps100%
ADI AR 2207<<locked>>80%34,084 psi55%2638 fps99.9%
ADI AR 221937.6 gr86%37,072 psi59%2743 fps95.5%
Alliant AR-Comp<<locked>>84%25,628 psi41%2480 fps95.5%
Alliant Reloder-10x<<locked>>80%28,166 psi45%2510 fps95.7%
Alliant Reloder-7<<locked>>80%35,534 psi57%2635 fps98.5%
Baschieri & Pellagri 106<<locked>>84%35,563 psi57%2602 fps95.7%
Hodgdon CFE BLK<<locked>>80%51,503 psi83%2940 fps95.1%
Hodgdon H322<<locked>>88%35,911 psi58%2717 fps95.1%
Hodgdon H335<<locked>>92%41,626 psi67%2841 fps95.7%
Hodgdon H4198<<locked>>82%39,117 psi63%2671 fps95.7%
Hodgdon TrailBoss<<locked>>80%22,756 psi36%1594 fps100%
IMR 3031<<locked>>94%33,402 psi54%2713 fps95.1%
IMR 4198<<locked>>80%30,879 psi50%2530 fps97.5%
IMR 4227<<locked>>80%41,930 psi67%2717 fps100%
Lovex D060<<locked>>80%49,995 psi80%2894 fps100%
Lovex D073.4<<locked>>88%42,656 psi68%2844 fps95%
Lovex D073.5<<locked>>98%48,428 psi78%2940 fps95.7%
Lovex S053<<locked>>80%40,988 psi66%2677 fps100%
Norma 200<<locked>>80%31,850 psi51%2595 fps97.8%
Norma 202<<locked>>98%38,696 psi62%2785 fps95%
ReloadSwiss RS 14<<locked>>80%22,437 psi36%1631 fps100%
ReloadSwiss RS 36<<locked>>80%41,089 psi66%2740 fps99.9%
ReloadSwiss RS 40<<locked>>94%43,613 psi70%2851 fps95%
Rottweil R 901<<locked>>96%39,972 psi64%2776 fps95.1%
Shooters World AR Plus39.9 gr88%42,656 psi68%2844 fps95%
Shooters World Buffalo Rifle<<locked>>80%49,995 psi80%2894 fps100%
Shooters World SOCOM<<locked>>80%50,908 psi82%2864 fps100%
SNPE Vectan BA6 1/2<<locked>>80%38,087 psi61%2484 fps100%
SNPE Vectan SP 1039.8 gr88%39,842 psi64%2799 fps95.1%
SNPE Vectan SP 3<<locked>>84%33,112 psi53%2621 fps95.2%
SNPE Vectan Tubal 3000<<locked>>96%39,972 psi64%2710 fps95.1%
Somchem S335<<locked>>94%35,984 psi58%2651 fps95.1%
Vihtavuori N110<<locked>>80%47,877 psi77%2710 fps100%
Vihtavuori N120<<locked>>80%34,301 psi55%2605 fps100%
Vihtavuori N130<<locked>>82%29,254 psi47%2480 fps95.8%
Vihtavuori N133<<locked>>88%30,618 psi49%2523 fps95%
Vihtavuori N135<<locked>>94%30,037 psi48%2595 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for .300 CR loaded with the .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP. SNPE Vectan SP 10 delivers the highest muzzle velocity at 3,087 fps; across all powders the maximum-charge window runs from 1,788 fps to 3,087 fps. Accurate 2015 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (430 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, SNPE Vectan SP 10, Shooters World AR Plus rank at the top here: for .300 CR with the .308 | 120gr | GM Geschoss-Manufaktur Splinter TIP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data