Load data for .300 AAC Blackout + .308 | 220gr | MAKER 300 blackout

.300 AAC Blackout cartridge drawing
MAKER logo

Load Specifications

Bullet Manufacturer:MAKER
Bullet Weight:220 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.367"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:25.1 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:16"
Max. allowed Pressure:50,763 psi
Recommended Twist Rate:1:11.0

Load data in caliber .300 AAC Blackout with .308 | 220gr | MAKER 300 blackout bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Accurate No. 11 FS and ADI AR 2205.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>94%44,425 psi88%1348 fps97.8%
ADI AR 2205<<locked>>96%45,556 psi90%1309 fps99.2%
Hodgdon LilGun<<locked>>92%45,542 psi90%1407 fps100%
Hodgdon TrailBossᴾ<<locked>>100%25,034 psi49%778 fps100%
Lovex S040<<locked>>88%44,338 psi87%1299 fps100%
Lovex S053ᴾ<<locked>>100%36,463 psi72%1289 fps98%
ReloadSwiss RS 14ᴾ<<locked>>100%24,366 psi48%797 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%33,895 psi67%1214 fps100%
Vihtavuori N110ᴾ<<locked>>100%43,105 psi85%1329 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS10.1 gr86%34,795 psi69%1257 fps95.6%
ADI AR 22058.6 gr80%28,079 psi55%1125 fps95.3%
Hodgdon LilGun9.4 gr80%30,487 psi60%1266 fps100%
Hodgdon TrailBoss<<locked>>80%18,695 psi37%699 fps100%
Lovex S040<<locked>>80%35,244 psi69%1214 fps99.9%
Lovex S053<<locked>>90%27,064 psi53%1175 fps95.1%
ReloadSwiss RS 14<<locked>>80%17,593 psi35%709 fps100%
SNPE Vectan BA6 1/2<<locked>>80%20,088 psi40%1027 fps98.7%
Vihtavuori N110<<locked>>80%24,685 psi49%1129 fps99%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .300 AAC Blackout loaded with the .308 | 220gr | MAKER 300 blackout . Hodgdon LilGun delivers the highest muzzle velocity at 1,407 fps; across all powders the maximum-charge window runs from 778 fps to 1,407 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (350 MPa), the top charges use 48–90 %, leaving at least 10 % headroom. The 220.0 gr projectile in 0.308" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Accurate No. 11 FS, ADI AR 2205 rank at the top here: for .300 AAC Blackout with the .308 | 220gr | MAKER 300 blackout they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data