top of page

Load data for .300 AAC Blackout + .308 | 180gr | Norma ORYX

Recommended Powder(s):

.300 AAC Blackout + .308 | 180gr | Norma ORYX

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 180gr | Norma ORYX
Manufacturer SKU:
67638
Bullet Weight:
180gr | 11.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.193" | 30.3mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.334" | 8.5mm
Shank Seated Depth:
0.334" | 8.5mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B3868_C348
Last updated:
2025-01-01

Load data for 28 loads in caliber .300 AAC Blackout with .308 | 180gr | Norma ORYX bullet and 14 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
89%
44904
88%
**26
100%
ADI AR 2207
<<locked>>
96%
32996
65%
**29
98%
[Accurate 1680]*
<<locked>>
95%
44933
89%
**11
94%
Accurate 5744
<<locked>>
86%
44353
87%
**95
98%
Accurate No. 11 FS
<<locked>>
86%
44063
87%
**81
100%
Alliant Reloder-7
<<locked>>
96%
34882
69%
**13
95%
IMR 4227
<<locked>>
96%
44179
87%
**85
99%
Lovex D060
<<locked>>
88%
44353
87%
**95
98%
Lovex D063
<<locked>>
86%
45281
89%
**01
98%
Lovex S053
<<locked>>
95%
40422
80%
**49
100%
ReloadSwiss RS 36 👍
<<locked>>
96%
41495
82%
**98
98%
Shooters World Blackout
<<locked>>
86%
45281
89%
**01
98%
Shooters World Buffalo Rifle
<<locked>>
88%
44353
87%
**95
98%
Vihtavuori N110
<<locked>>
91%
43366
85%
**39
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
83%
37927
75%
**47
100%
ADI AR 2207
<<locked>>
92%
29675
58%
**70
97%
[Accurate 1680]*
<<locked>>
86%
34040
67%
**67
91%
Accurate 5744
<<locked>>
81%
37797
74%
**03
96%
Accurate No. 11 FS
<<locked>>
81%
37159
73%
**96
99%
[Alliant Reloder-7]*
<<locked>>
92%
31082
61%
**54
94%
IMR 4227
<<locked>>
88%
35012
69%
**67
97%
Lovex D060
<<locked>>
81%
35578
70%
**70
95%
Lovex D063
<<locked>>
81%
38261
75%
**09
96%
Lovex S053
<<locked>>
89%
34447
68%
**70
100%
ReloadSwiss RS 36
<<locked>>
87%
31749
63%
**57
96%
Shooters World Blackout
<<locked>>
81%
38261
75%
**09
96%
Shooters World Buffalo Rifle
<<locked>>
81%
35578
70%
**70
95%
Vihtavuori N110
<<locked>>
85%
36216
71%
**60
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page