top of page

Load data for .300 AAC Blackout + .308 | 180gr | AlaskaBulletWorks Kodiak SP SPBC

Recommended Powder(s):

.300 AAC Blackout + .308 | 180gr | AlaskaBulletWorks Kodiak SP SPBC

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 180gr | AlaskaBulletWorks Kodiak SP SPBC
Bullet Weight:
180gr | 11.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
<<locked>>
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B304_C348
Last updated:
2026-01-30

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 180gr | AlaskaBulletWorks Kodiak SP SPBC bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 1680]*
<<locked>>
96%
43526
86%
**42
93%
Accurate 5744
<<locked>>
90%
45382
89%
**55
97%
Accurate No. 11 FS
<<locked>>
90%
45295
89%
**49
99%
Hodgdon LilGun
<<locked>>
85%
44353
87%
**78
100%
IMR 4227
<<locked>>
97%
41698
82%
**09
98%
Lovex D060
<<locked>>
92%
45382
89%
**55
97%
Lovex D063
<<locked>>
89%
45658
90%
**52
97%
Lovex S040
<<locked>>
84%
45165
89%
**73
100%
Lovex S053
<<locked>>
97%
38769
76%
**90
100%
ReloadSwiss RS 36
<<locked>>
96%
38189
75%
**09
97%
Shooters World Blackout
<<locked>>
89%
45658
90%
**52
97%
Shooters World Buffalo Rifle
<<locked>>
92%
45382
89%
**55
97%
Vihtavuori N110
<<locked>>
95%
44831
88%
**16
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 1680]*
<<locked>>
91%
35795
71%
**47
90%
Accurate 5744
<<locked>>
82%
36782
72%
**44
95%
Accurate No. 11 FS
<<locked>>
83%
36492
72%
**47
98%
Hodgdon LilGun
<<locked>>
81%
37840
75%
**09
100%
IMR 4227
<<locked>>
93%
36637
72%
**44
97%
Lovex D060
<<locked>>
84%
36782
72%
**44
95%
Lovex D063
<<locked>>
82%
36840
73%
**44
95%
Lovex S040
<<locked>>
82%
42395
84%
**47
100%
Lovex S053
<<locked>>
93%
35346
70%
**44
99%
ReloadSwiss RS 36
<<locked>>
92%
34069
67%
**50
96%
Shooters World Blackout
<<locked>>
82%
36840
73%
**44
95%
Shooters World Buffalo Rifle
<<locked>>
84%
36782
72%
**44
95%
Vihtavuori N110
<<locked>>
90%
38130
75%
**44
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page