top of page

Load data for .300 AAC Blackout + .308 | 165gr Hornady ECX

Recommended Powder(s):

.300 AAC Blackout + .308 | 165gr Hornady ECX

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 165gr Hornady ECX
Manufacturer SKU:
304714
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
<<locked>>
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B1383_C348
Last updated:
2026-03-02

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 165gr Hornady ECX bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
94%
45324
89%
**52
100%
Accurate 5744
<<locked>>
92%
44759
88%
**08
95%
Accurate No. 11 FS 👍
<<locked>>
93%
45585
90%
**18
99%
Hodgdon LilGun
<<locked>>
89%
44947
89%
**70
100%
IMR 4227
<<locked>>
97%
38116
75%
**22
95%
Lovex D060
<<locked>>
94%
44759
88%
**08
95%
Lovex D063
<<locked>>
91%
45049
89%
**04
95%
Lovex S040
<<locked>>
87%
45672
90%
**52
100%
Lovex S053
<<locked>>
97%
34969
69%
**06
98%
[ReloadSwiss RS 36]*
<<locked>>
96%
35056
69%
**22
94%
Shooters World Blackout
<<locked>>
91%
45049
89%
**04
95%
Shooters World Buffalo Rifle
<<locked>>
94%
44759
88%
**08
95%
Vihtavuori N110
<<locked>>
96%
41742
82%
**62
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
36782
72%
**47
99%
[Accurate 5744]*
<<locked>>
81%
33185
65%
**40
92%
Accurate No. 11 FS
<<locked>>
82%
32271
64%
**44
96%
Hodgdon LilGun
<<locked>>
81%
34853
69%
**52
100%
[IMR 4227]*
<<locked>>
91%
32677
64%
**40
94%
[Lovex D060]*
<<locked>>
83%
33185
65%
**40
92%
[Lovex D063]*
<<locked>>
82%
34185
67%
**57
92%
Lovex S040
<<locked>>
80%
37434
74%
**57
100%
Lovex S053
<<locked>>
92%
31067
61%
**47
97%
[ReloadSwiss RS 36]*
<<locked>>
91%
30110
59%
**40
92%
[Shooters World Blackout]*
<<locked>>
82%
34185
67%
**57
92%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
33185
65%
**40
92%
Vihtavuori N110
<<locked>>
87%
32256
64%
**40
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page