top of page

Load data for .300 AAC Blackout + .308 | 165gr | Hornady BTSP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): Accurate No. 11 FS

.300 AAC Blackout + .308 | 165gr | Hornady BTSP

Load Specifications

Bullet:
.308 | 165gr | Hornady BTSP
Manufacturer SKU:
3045
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.191" | 30.3mm
Caliber:
.300 AAC Blackout
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.332" | 8.4mm
Shank Seated Depth:
0.132" | 3.4mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B2679_C348
Recommended Twist Rate:
1:13 - 1:11

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 36 loads in caliber .300 AAC Blackout with .308 | 165gr | Hornady BTSP bullet and 18 powders such as Accurate No. 11 FS. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
90%
44498
88%
**24
100%
ADI AR 2207
<<locked>>
96%
31560
62%
**98
97%
[Accurate 1680]*
<<locked>>
96%
44715
88%
**09
93%
Accurate 5744
<<locked>>
88%
45498
90%
**09
97%
Accurate No. 11 FS 👍
<<locked>>
88%
44541
88%
**90
99%
[Alliant Reloder-7]*
<<locked>>
95%
33098
65%
**81
94%
[IMR 4198]*
<<locked>>
96%
30560
60%
**13
92%
IMR 4227
<<locked>>
96%
42366
83%
**67
98%
Lovex D060
<<locked>>
90%
45498
90%
**09
97%
Lovex D063
<<locked>>
86%
43584
86%
**80
97%
Lovex S053
<<locked>>
96%
40263
79%
**50
100%
[Norma 200]*
<<locked>>
97%
28558
56%
**62
92%
ReloadSwiss RS 36
<<locked>>
96%
40625
80%
**86
98%
SNPE Vectan BA6 1/2
<<locked>>
96%
36956
73%
**22
100%
Shooters World Blackout
<<locked>>
86%
43584
86%
**80
97%
Shooters World Buffalo Rifle
<<locked>>
90%
45498
90%
**09
97%
Vihtavuori N110
<<locked>>
93%
43511
86%
**47
100%
Vihtavuori N120
<<locked>>
96%
30226
60%
**45
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
34171
67%
**90
99%
[ADI AR 2207]*
<<locked>>
87%
24279
48%
**50
94%
[Accurate 1680]*
<<locked>>
89%
36230
71%
**95
91%
Accurate 5744
<<locked>>
81%
36738
72%
**85
95%
Accurate No. 11 FS
<<locked>>
81%
35882
71%
**75
98%
[Alliant Reloder-7]*
<<locked>>
88%
26948
53%
**67
91%
[IMR 4198]*
<<locked>>
92%
27760
55%
**54
91%
[IMR 4227]*
<<locked>>
83%
28979
57%
**57
94%
[Lovex D060]*
<<locked>>
81%
34911
69%
**55
94%
Lovex D063
<<locked>>
81%
36970
73%
**91
95%
Lovex S053
<<locked>>
83%
27427
54%
**50
98%
[Norma 200]*
<<locked>>
92%
24381
48%
**77
90%
[ReloadSwiss RS 36]*
<<locked>>
82%
26658
53%
**54
93%
SNPE Vectan BA6 1/2
<<locked>>
89%
31459
62%
**47
100%
Shooters World Blackout
<<locked>>
81%
36970
73%
**91
95%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
34911
69%
**55
94%
Vihtavuori N110
<<locked>>
81%
30603
60%
**80
100%
Vihtavuori N120
<<locked>>
91%
25730
51%
**57
96%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page