top of page

Load data for .300 AAC Blackout + .308 | 165gr | Barnes TSX BT

Recommended Powder(s): none

.300 AAC Blackout + .308 | 165gr | Barnes TSX BT

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 165gr | Barnes TSX BT
Manufacturer SKU:
30349
Bullet Weight:
165gr | 10.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.295" | 32.9mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.436" | 11.1mm
Shank Seated Depth:
0.311" | 7.9mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B617_C348
Last updated:
2025-01-01
Recommended Twist Rate:
1:11 - 1:9

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 165gr | Barnes TSX BT bullet and 13 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
93%
44570
88%
**55
100%
Accurate 5744
<<locked>>
91%
44135
87%
**14
95%
Accurate No. 11 FS
<<locked>>
91%
43236
85%
**04
98%
Hodgdon LilGun
<<locked>>
88%
44512
88%
**73
100%
IMR 4227
<<locked>>
96%
37478
74%
**29
96%
Lovex D060
<<locked>>
94%
45484
90%
**31
96%
Lovex D063
<<locked>>
91%
45527
90%
**24
96%
Lovex S040
<<locked>>
85%
43830
86%
**42
100%
Lovex S053
<<locked>>
96%
34780
69%
**13
98%
ReloadSwiss RS 36
<<locked>>
95%
34374
68%
**26
95%
Shooters World Blackout
<<locked>>
91%
45527
90%
**24
96%
Shooters World Buffalo Rifle
<<locked>>
94%
45484
90%
**31
96%
Vihtavuori N110
<<locked>>
97%
42931
85%
**85
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
37333
74%
**67
99%
[Accurate 5744]*
<<locked>>
81%
32706
64%
**47
92%
Accurate No. 11 FS
<<locked>>
81%
32097
63%
**54
96%
Hodgdon LilGun
<<locked>>
81%
34693
68%
**59
100%
[IMR 4227]*
<<locked>>
92%
33417
66%
**63
94%
[Lovex D060]*
<<locked>>
83%
33823
67%
**63
92%
[Lovex D063]*
<<locked>>
81%
33678
66%
**63
92%
Lovex S040
<<locked>>
81%
38740
76%
**83
100%
Lovex S053
<<locked>>
91%
30951
61%
**54
98%
[ReloadSwiss RS 36]*
<<locked>>
91%
30661
60%
**63
93%
[Shooters World Blackout]*
<<locked>>
81%
33678
66%
**63
92%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
33823
67%
**63
92%
Vihtavuori N110
<<locked>>
87%
33025
65%
**63
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page