top of page

Load data for .300 AAC Blackout + .308 | 150gr | CutEdge Maximus

Recommended Powder(s): ADI AR 2205, Accurate No. 11 FS

.300 AAC Blackout + .308 | 150gr | CutEdge Maximus

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 150gr | CutEdge Maximus
Manufacturer SKU:
Maximus
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.248" | 31.7mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.389" | 9.9mm
Shank Seated Depth:
0.153" | 3.9mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B8479_C348
Last updated:
2025-01-01
Recommended Twist Rate:
1:11 - 1:10

Load data for 32 loads in caliber .300 AAC Blackout with .308 | 150gr | CutEdge Maximus bullet and 16 powders such as ADI AR 2205, Accurate No. 11 FS. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 13.5 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205 👍
<<locked>>
95%
45426
89%
**09
100%
[ADI AR 2207]*
<<locked>>
96%
26847
53%
**72
93%
Accurate 5744
<<locked>>
92%
45034
89%
**75
95%
Accurate No. 11 FS 👍
<<locked>>
91%
43511
86%
**55
98%
Hodgdon LilGun
<<locked>>
88%
43163
85%
**14
100%
IMR 4227
<<locked>>
96%
37289
73%
**64
95%
Lovex D060
<<locked>>
94%
45034
89%
**75
95%
Lovex D063
<<locked>>
91%
45614
90%
**72
95%
Lovex S040
<<locked>>
87%
44976
89%
**03
100%
Lovex S053
<<locked>>
95%
33547
66%
**34
98%
[ReloadSwiss RS 36]*
<<locked>>
96%
34432
68%
**64
94%
SNPE Vectan BA6 1/2
<<locked>>
97%
32518
64%
**49
100%
Shooters World Blackout
<<locked>>
91%
45614
90%
**72
95%
Shooters World Buffalo Rifle
<<locked>>
94%
45034
89%
**75
95%
Vihtavuori N110
<<locked>>
96%
40524
80%
**06
100%
[Vihtavuori N120]*
<<locked>>
97%
25933
51%
**26
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
30530
60%
**99
97%
[ADI AR 2207]*
<<locked>>
90%
22960
45%
**77
90%
[Accurate 5744]*
<<locked>>
81%
32416
64%
**75
91%
Accurate No. 11 FS
<<locked>>
81%
30792
61%
**68
95%
Hodgdon LilGun
<<locked>>
81%
33895
67%
**96
100%
[IMR 4227]*
<<locked>>
85%
26339
52%
**67
91%
[Lovex D060]*
<<locked>>
81%
30705
60%
**42
90%
[Lovex D063]*
<<locked>>
81%
32474
64%
**78
91%
Lovex S040
<<locked>>
81%
37579
74%
**11
100%
[Lovex S053]*
<<locked>>
83%
23627
47%
**44
94%
[ReloadSwiss RS 36]*
<<locked>>
87%
26136
51%
**06
90%
SNPE Vectan BA6 1/2
<<locked>>
90%
27224
54%
**63
100%
[Shooters World Blackout]*
<<locked>>
81%
32474
64%
**78
91%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
30705
60%
**42
90%
Vihtavuori N110
<<locked>>
81%
26121
51%
**90
100%
[Vihtavuori N120]*
<<locked>>
93%
23105
46%
**60
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page