top of page

Load data for .300 AAC Blackout + .308 | 146gr | Peregrine Glider GRM

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): Hodgdon LilGun

.300 AAC Blackout + .308 | 146gr | Peregrine Glider GRM

Load Specifications

Bullet:
.308 | 146gr | Peregrine Glider GRM
Bullet Weight:
146gr | 9.5g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.311" | 33.3mm
Caliber:
.300 AAC Blackout
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.452" | 11.5mm
Shank Seated Depth:
0.251" | 6.4mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B8094_C348
Recommended Twist Rate:
1:10 - 1:9

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 146gr | Peregrine Glider GRM bullet and 13 powders such as Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
95%
43279
85%
**50
99%
[Accurate 5744]*
<<locked>>
95%
45121
89%
**36
94%
Accurate No. 11 FS
<<locked>>
94%
43613
86%
**23
97%
Hodgdon LilGun 👍
<<locked>>
92%
43830
86%
**08
100%
[IMR 4227]*
<<locked>>
96%
33895
67%
**72
92%
[Lovex D060]*
<<locked>>
96%
43845
86%
**19
93%
[Lovex D063]*
<<locked>>
92%
43511
86%
**06
93%
Lovex S040
<<locked>>
90%
45078
89%
**83
100%
Lovex S053
<<locked>>
97%
31879
63%
**81
96%
SNPE Vectan BA6 1/2
<<locked>>
95%
28863
57%
**70
100%
[Shooters World Blackout]*
<<locked>>
92%
43511
86%
**06
93%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
43845
86%
**19
93%
Vihtavuori N110
<<locked>>
97%
38247
75%
**57
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
83%
29776
59%
**57
95%
[Accurate 5744]*
<<locked>>
87%
35708
70%
**98
91%
[Accurate No. 11 FS]*
<<locked>>
81%
28311
56%
**93
92%
Hodgdon LilGun
<<locked>>
81%
29733
59%
**18
100%
[IMR 4227]*
<<locked>>
92%
30037
59%
**06
90%
[Lovex D060]*
<<locked>>
88%
34824
69%
**81
90%
[Lovex D063]*
<<locked>>
87%
36390
72%
**04
91%
Lovex S040
<<locked>>
81%
34809
69%
**49
100%
[Lovex S053]*
<<locked>>
88%
24816
49%
**44
93%
SNPE Vectan BA6 1/2
<<locked>>
93%
27195
54%
**44
100%
[Shooters World Blackout]*
<<locked>>
87%
36390
72%
**04
91%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
34824
69%
**81
90%
Vihtavuori N110
<<locked>>
83%
25498
50%
**54
99%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page