top of page

Load data for .300 AAC Blackout + .308 | 130gr | Barnes XLC BT

Recommended Powder(s): Accurate No. 11 FS, Vihtavuori N110

.300 AAC Blackout + .308 | 130gr | Barnes XLC BT

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 130gr | Barnes XLC BT
Manufacturer SKU:
30851
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.070" | 27.2mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.215" | 56.3mm
Seated Depth:
0.222" | 5.6mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B598_C348
Last updated:
2025-01-01
Recommended Twist Rate:
1:13 - 1:11

Load data for 32 loads in caliber .300 AAC Blackout with .308 | 130gr | Barnes XLC BT bullet and 16 powders such as Accurate No. 11 FS, Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 15.2 fps

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
91%
87%
99%
ADI AR 2207
96%
60%
93%
Accurate 5744
90%
89%
94%
Accurate No. 11 FS
90%
89%
98%
Hodgdon LilGun
86%
87%
100%
IMR 4227
96%
80%
95%
Lovex D060
91%
86%
94%
Lovex D063
88%
87%
94%
Lovex S040
85%
90%
100%
Lovex S053
96%
74%
98%
ReloadSwiss RS 36
95%
74%
94%
SNPE Vectan BA6 1/2
97%
71%
100%
Shooters World Blackout
88%
87%
94%
Shooters World Buffalo Rifle
91%
86%
94%
Vihtavuori N110
95%
86%
100%
Vihtavuori N120
96%
58%
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
33417
66%
**03
97%
[ADI AR 2207]*
<<locked>>
89%
25512
50%
**77
90%
[Accurate 5744]*
<<locked>>
81%
36027
71%
**01
91%
Accurate No. 11 FS
<<locked>>
81%
34287
68%
**82
95%
Hodgdon LilGun
<<locked>>
81%
38319
75%
**33
100%
[IMR 4227]*
<<locked>>
84%
29240
58%
**70
91%
[Lovex D060]*
<<locked>>
81%
33301
66%
**49
90%
[Lovex D063]*
<<locked>>
81%
35244
69%
**85
91%
Lovex S040
<<locked>>
81%
41191
81%
**34
100%
[Lovex S053]*
<<locked>>
81%
25889
51%
**27
94%
[ReloadSwiss RS 36]*
<<locked>>
86%
28703
57%
**03
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
25164
50%
**52
100%
[Shooters World Blackout]*
<<locked>>
81%
35244
69%
**85
91%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
33301
66%
**49
90%
Vihtavuori N110
<<locked>>
81%
30574
60%
**16
100%
[Vihtavuori N120]*
<<locked>>
88%
23902
47%
**98
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page