Load data for .300 AAC Blackout + .308 | 120gr | Reichenberg HDB Universal

.300 AAC Blackout cartridge drawing
Reichenberg logo

Load Specifications

Bullet Manufacturer:Reichenberg
Bullet Weight:120 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.367"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:25.1 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:16"
Max. allowed Pressure:50,763 psi

Load data in caliber .300 AAC Blackout with .308 | 120gr | Reichenberg HDB Universal bullet and 7 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and Vihtavuori N110.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>96%43,830 psi86%2054 fps96.9%
Hodgdon LilGun<<locked>>92%44,092 psi87%2218 fps100%
Hodgdon TrailBossᴾ<<locked>>100%24,163 psi48%1280 fps100%
Lovex S040<<locked>>90%45,208 psi89%2093 fps99.8%
ReloadSwiss RS 14ᴾ<<locked>>100%22,989 psi45%1302 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%32,561 psi64%1916 fps99.7%
Vihtavuori N110ᴾ<<locked>>100%41,698 psi82%2103 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 16"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>90%36,680 psi72%1946 fps95%
Hodgdon LilGun16.3 gr80%28,935 psi57%1972 fps98.4%
Hodgdon TrailBoss<<locked>>80%17,448 psi34%1138 fps100%
Lovex S04014 gr80%33,823 psi67%1919 fps98.3%
ReloadSwiss RS 14<<locked>>80%16,723 psi33%1165 fps100%
SNPE Vectan BA6 1/2<<locked>>80%19,160 psi38%1604 fps95.1%
Vihtavuori N11013.4 gr80%22,756 psi45%1745 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .300 AAC Blackout loaded with the .308 | 120gr | Reichenberg HDB Universal. Hodgdon LilGun delivers the highest muzzle velocity at 2,218 fps; across all powders the maximum-charge window runs from 1,280 fps to 2,218 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (350 MPa), the top charges use 45–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, Lovex S053, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, Vihtavuori N110 rank at the top here: for .300 AAC Blackout with the .308 | 120gr | Reichenberg HDB Universal they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate No. 11 FS, Lovex S053 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data