top of page

Load data for .300 AAC Blackout + .308 | 110gr | Winchester Hollow Point

Recommended Powder(s): Hodgdon LilGun

.300 AAC Blackout + .308 | 110gr | Winchester Hollow Point

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 110gr | Winchester Hollow Point
Bullet Weight:
110gr | 7.1g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.141" | 3.6mm
Shank Seated Depth:
0.141" | 3.6mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B6627_C348
Last updated:
2025-01-01

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 110gr | Winchester Hollow Point bullet and 13 powders such as Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
96%
45571
90%
**26
98%
[Accurate 5744]*
<<locked>>
94%
44382
87%
**79
92%
Accurate No. 11 FS
<<locked>>
94%
44048
87%
**82
96%
Hodgdon LilGun 👍
<<locked>>
91%
44048
87%
**84
100%
[IMR 4227]*
<<locked>>
97%
35940
71%
**24
91%
[Lovex D060]*
<<locked>>
96%
44382
87%
**79
92%
[Lovex D063]*
<<locked>>
92%
43961
87%
**56
92%
Lovex S040
<<locked>>
90%
45600
90%
**46
100%
Lovex S053
<<locked>>
96%
31502
62%
**85
95%
SNPE Vectan BA6 1/2
<<locked>>
95%
29747
59%
**90
100%
[Shooters World Blackout]*
<<locked>>
92%
43961
87%
**56
92%
[Shooters World Buffalo Rifle]*
<<locked>>
96%
44382
87%
**79
92%
Vihtavuori N110
<<locked>>
97%
39189
77%
**16
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
81%
28500
56%
**18
93%
[Accurate 5744]*
<<locked>>
89%
38841
77%
**80
90%
[Accurate No. 11 FS]*
<<locked>>
81%
28950
57%
**93
91%
Hodgdon LilGun
<<locked>>
81%
31125
61%
**70
100%
[IMR 4227]*
<<locked>>
94%
32619
64%
**59
90%
[Lovex D060]*
<<locked>>
91%
38841
77%
**80
90%
[Lovex D063]*
<<locked>>
89%
40263
79%
**93
91%
Lovex S040
<<locked>>
81%
35795
71%
**88
99%
[Lovex S053]*
<<locked>>
84%
22742
45%
**62
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
20262
40%
**47
97%
[Shooters World Blackout]*
<<locked>>
89%
40263
79%
**93
91%
[Shooters World Buffalo Rifle]*
<<locked>>
91%
38841
77%
**80
90%
Vihtavuori N110
<<locked>>
81%
24816
49%
**24
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page