Load data for .30 Super Fl. H&H + .311 | 180gr | Norma Semi Soft Point

.30 Super Fl. H&H cartridge drawing
Norma logo

Load Specifications

Bullet Manufacturer:Norma
Bullet Weight:180 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.5

Load data in caliber .30 Super Fl. H&H with .311 | 180gr | Norma Semi Soft Point bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Hodgdon Retumbo and ReloadSwiss RS 76.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%40,364 psi87%2667 fps98.5%
ADI AR 2225ᴾ<<locked>>100%39,160 psi84%2759 fps97.8%
Alliant Power Pro Varmint<<locked>>84%40,045 psi86%2687 fps95.9%
Alliant Reloder-19<<locked>>84%39,639 psi85%2684 fps95.9%
Alliant Reloder-22<<locked>>88%40,147 psi87%2736 fps96.2%
Alliant Reloder-23<<locked>>90%41,031 psi88%2749 fps100%
Alliant Reloder-25<<locked>>94%40,625 psi88%2782 fps99.3%
Alliant Reloder-26<<locked>>86%39,711 psi86%2795 fps99.5%
Bofors RP15<<locked>>90%39,798 psi86%2730 fps96%
Bofors RP5<<locked>>88%40,147 psi87%2736 fps96.2%
Hodgdon Hybrid 100V<<locked>>82%40,263 psi87%2654 fps100%
Hodgdon Retumbo<<locked>>94%39,726 psi86%2812 fps96.7%
Hodgdon TrailBossᴾ<<locked>>100%36,695 psi79%1818 fps100%
Lovex S071<<locked>>94%41,611 psi90%2694 fps98.8%
Norma MRP<<locked>>86%39,334 psi85%2753 fps97.4%
Ramshot Magnum<<locked>>92%39,378 psi85%2713 fps96.8%
ReloadSwiss RS 14ᴾ<<locked>>100%37,608 psi81%1864 fps100%
ReloadSwiss RS 76<<locked>>94%39,204 psi84%2795 fps97.7%
Rottweil R 905<<locked>>86%41,626 psi90%2726 fps96.7%
SNPE Vectan Tubal 8000<<locked>>86%41,249 psi89%2720 fps96.6%
Somchem S365<<locked>>82%40,350 psi87%2707 fps100%
Somchem S385<<locked>>84%39,436 psi85%2648 fps96.9%
Vihtavuori N165<<locked>>90%41,582 psi90%2687 fps97.1%
Vihtavuori N555<<locked>>86%40,408 psi87%2720 fps99.8%
Winchester StaBALL HD<<locked>>92%39,392 psi85%2851 fps100%
Winchester Supreme 780<<locked>>88%41,423 psi89%2687 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%30,763 psi66%2444 fps95.5%
ADI AR 2225<<locked>>96%34,432 psi74%2635 fps95.8%
Alliant Power Pro Varmint<<locked>>82%37,594 psi81%2635 fps95.1%
Alliant Reloder-19<<locked>>82%37,260 psi80%2628 fps95%
Alliant Reloder-22<<locked>>86%37,536 psi81%2677 fps95.3%
Alliant Reloder-23<<locked>>80%29,559 psi64%2474 fps98.6%
Alliant Reloder-25<<locked>>84%29,544 psi64%2487 fps95.4%
Alliant Reloder-26<<locked>>80%31,865 psi69%2598 fps97.5%
Bofors RP15<<locked>>88%37,231 psi80%2671 fps95%
Bofors RP5<<locked>>86%37,536 psi81%2677 fps95.3%
Hodgdon Hybrid 100V<<locked>>80%37,536 psi81%2598 fps99.9%
Hodgdon Retumbo72.6 gr92%37,217 psi80%2746 fps95.7%
Hodgdon TrailBoss<<locked>>80%27,586 psi59%1627 fps100%
Lovex S071<<locked>>84%30,095 psi65%2425 fps95.2%
Norma MRP<<locked>>82%34,200 psi74%2625 fps95.6%
Ramshot Magnum<<locked>>90%36,593 psi79%2648 fps95.8%
ReloadSwiss RS 14<<locked>>80%28,137 psi61%1667 fps100%
ReloadSwiss RS 7676 gr90%34,084 psi73%2657 fps95.5%
Rottweil R 905<<locked>>84%38,856 psi84%2667 fps95.8%
SNPE Vectan Tubal 8000<<locked>>84%38,508 psi83%2661 fps95.7%
Somchem S365<<locked>>80%37,594 psi81%2651 fps100%
Somchem S385<<locked>>80%34,679 psi75%2539 fps95.2%
Vihtavuori N165<<locked>>86%36,477 psi79%2575 fps95.5%
Vihtavuori N555<<locked>>80%33,083 psi71%2552 fps98.5%
Winchester StaBALL HD64.8 gr80%26,136 psi56%2464 fps98.2%
Winchester Supreme 780<<locked>>86%38,667 psi83%2631 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .311 | 180gr | Norma Semi Soft Point. Winchester StaBALL HD delivers the highest muzzle velocity at 2,851 fps; across all powders the maximum-charge window runs from 1,818 fps to 2,851 fps. ADI AR 2225 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.311" calls for a 1:14.5 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Hodgdon Retumbo, ReloadSwiss RS 76 rank at the top here: for .30 Super Fl. H&H with the .311 | 180gr | Norma Semi Soft Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data