Load data for .30 Super Fl. H&H + .310 | 150gr | Rhino Penetrator

.30 Super Fl. H&H cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:150 gr
Bullet Diameter:0.31"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:13.0

Load data in caliber .30 Super Fl. H&H with .310 | 150gr | Rhino Penetrator bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Alliant Reloder-26 and Vihtavuori N555.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%41,104 psi89%2900 fps96.9%
Accurate 4350<<locked>>84%40,147 psi87%2904 fps98.1%
Alliant Reloder-16<<locked>>86%41,655 psi90%2976 fps98.8%
Alliant Reloder-17<<locked>>82%41,452 psi89%2992 fps99.7%
Alliant Reloder-23<<locked>>96%41,756 psi90%2995 fps99.7%
Alliant Reloder-25ᴾ<<locked>>100%41,611 psi90%3012 fps97.8%
Alliant Reloder-26<<locked>>92%40,538 psi87%3035 fps98.2%
Hodgdon Hybrid 100V<<locked>>88%41,350 psi89%2910 fps99.6%
Hodgdon TrailBossᴾ<<locked>>100%36,085 psi78%1972 fps100%
IMR 4831<<locked>>86%41,089 psi89%2910 fps98.4%
Lovex S065<<locked>>82%40,669 psi88%2841 fps97%
Lovex S070<<locked>>84%41,292 psi89%2874 fps96%
Lovex S071<<locked>>98%39,334 psi85%2861 fps96.3%
Norma URP<<locked>>84%39,740 psi86%2894 fps97.9%
Ramshot Hunter<<locked>>86%41,408 psi89%2943 fps96.8%
ReloadSwiss RS 14ᴾ<<locked>>100%36,695 psi79%2018 fps100%
ReloadSwiss RS 62<<locked>>84%39,856 psi86%2923 fps97.8%
ReloadSwiss RS 70<<locked>>86%41,756 psi90%2999 fps98%
Shooters World Long Rifle<<locked>>82%40,669 psi88%2841 fps97%
Shooters World SW4350<<locked>>84%41,292 psi89%2874 fps96%
Somchem S365<<locked>>88%41,191 psi89%2966 fps100%
Vihtavuori N160<<locked>>84%41,481 psi89%2900 fps98.3%
Vihtavuori N550<<locked>>84%40,872 psi88%2900 fps98%
Vihtavuori N555<<locked>>92%40,814 psi88%2959 fps98.8%
Winchester 6.5 StaBALL<<locked>>84%40,756 psi88%2864 fps99.7%
Winchester StaBALL HD<<locked>>98%40,016 psi86%3084 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>90%35,839 psi77%2779 fps95.1%
Accurate 4350<<locked>>80%34,737 psi75%2776 fps96.6%
Alliant Reloder-16<<locked>>80%34,272 psi74%2785 fps96.6%
Alliant Reloder-17<<locked>>80%38,725 psi83%2930 fps99.3%
Alliant Reloder-23<<locked>>84%28,398 psi61%2631 fps95.7%
Alliant Reloder-25<<locked>>96%36,651 psi79%2881 fps96%
Alliant Reloder-2671.9 gr86%32,706 psi70%2818 fps95.1%
Hodgdon Hybrid 100V<<locked>>80%31,763 psi68%2677 fps97.4%
Hodgdon TrailBoss<<locked>>80%26,992 psi58%1765 fps100%
IMR 4831<<locked>>80%33,562 psi72%2726 fps96.2%
Lovex S065<<locked>>80%38,203 psi82%2782 fps96.2%
Lovex S070<<locked>>82%38,827 psi84%2818 fps95.2%
Lovex S071<<locked>>96%36,796 psi79%2802 fps95.5%
Norma URP<<locked>>80%34,867 psi75%2776 fps96.5%
Ramshot Hunter<<locked>>82%36,216 psi78%2818 fps95%
ReloadSwiss RS 14<<locked>>80%27,427 psi59%1808 fps100%
ReloadSwiss RS 62<<locked>>80%34,490 psi74%2789 fps96.1%
ReloadSwiss RS 70<<locked>>80%33,924 psi73%2792 fps95.1%
Shooters World Long Rifle<<locked>>80%38,203 psi82%2782 fps96.2%
Shooters World SW4350<<locked>>82%38,827 psi84%2818 fps95.2%
Somchem S365<<locked>>80%31,299 psi67%2723 fps98.5%
Vihtavuori N160<<locked>>80%36,114 psi78%2776 fps96.9%
Vihtavuori N550<<locked>>80%35,752 psi77%2776 fps96.5%
Vihtavuori N55564.1 gr84%31,169 psi67%2720 fps95.9%
Winchester 6.5 StaBALL<<locked>>80%35,621 psi77%2746 fps98.8%
Winchester StaBALL HD69.1 gr86%26,861 psi58%2654 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .310 | 150gr | Rhino Penetrator. Winchester StaBALL HD delivers the highest muzzle velocity at 3,084 fps; across all powders the maximum-charge window runs from 1,972 fps to 3,084 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.31" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Alliant Reloder-26, Vihtavuori N555 rank at the top here: for .30 Super Fl. H&H with the .310 | 150gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data