
Load Specifications
Load data in caliber .30 Super Fl. H&H with .310 | 123gr | Hornady SP bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Somchem S365 and Vihtavuori N555.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 4350 | <<locked>> | 88% | 40,741 psi | 88% | 3176 fps | 96.5% |
| Alliant Reloder-16 | <<locked>> | 88% | 39,900 psi | 86% | 3186 fps | 96.5% |
| Alliant Reloder-17 | <<locked>> | 84% | 39,827 psi | 86% | 3209 fps | 98.1% |
| Alliant Reloder-23 | <<locked>> | 98% | 39,697 psi | 86% | 3192 fps | 98.1% |
| Alliant Reloder-26 | <<locked>> | 96% | 41,437 psi | 89% | 3294 fps | 96.4% |
| Hodgdon Hybrid 100V | <<locked>> | 90% | 39,363 psi | 85% | 3120 fps | 98% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 35,621 psi | 77% | 2175 fps | 100% |
| IMR 4831 | <<locked>> | 90% | 41,742 psi | 90% | 3179 fps | 96.9% |
| Norma URP | <<locked>> | 88% | 40,538 psi | 87% | 3169 fps | 96.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 36,056 psi | 78% | 2224 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 82% | 39,581 psi | 85% | 3219 fps | 99.7% |
| ReloadSwiss RS 62 | <<locked>> | 88% | 40,480 psi | 87% | 3189 fps | 96.1% |
| Rottweil R 903 | <<locked>> | 82% | 40,001 psi | 86% | 3114 fps | 98.2% |
| SNPE Vectan SP 11 | <<locked>> | 82% | 41,133 psi | 89% | 3173 fps | 97.8% |
| Somchem S355 | <<locked>> | 82% | 40,480 psi | 87% | 3114 fps | 98.1% |
| Somchem S365 | <<locked>> | 92% | 41,626 psi | 90% | 3241 fps | 99.5% |
| Vihtavuori N150 | <<locked>> | 84% | 41,408 psi | 89% | 3104 fps | 99.3% |
| Vihtavuori N160 | <<locked>> | 86% | 39,508 psi | 85% | 3107 fps | 96% |
| Vihtavuori N550 | <<locked>> | 88% | 41,742 psi | 90% | 3169 fps | 96.5% |
| Vihtavuori N555 | <<locked>> | 96% | 40,785 psi | 88% | 3219 fps | 97.3% |
| Winchester 6.5 StaBALL | <<locked>> | 86% | 39,581 psi | 85% | 3081 fps | 98.3% |
| Winchester StaBALL HDᴾ | <<locked>> | 100% | 38,116 psi | 82% | 3261 fps | 98.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 4350 | <<locked>> | 86% | 37,811 psi | 81% | 3104 fps | 95.6% |
| Alliant Reloder-16 | <<locked>> | 86% | 37,405 psi | 81% | 3114 fps | 95.5% |
| Alliant Reloder-17 | <<locked>> | 80% | 34,534 psi | 74% | 3061 fps | 96.3% |
| Alliant Reloder-23 | <<locked>> | 92% | 32,735 psi | 71% | 2995 fps | 95.4% |
| Alliant Reloder-26 | 82.1 gr | 94% | 38,609 psi | 83% | 3219 fps | 95.3% |
| Hodgdon Hybrid 100V | <<locked>> | 84% | 32,343 psi | 70% | 2927 fps | 95.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 26,469 psi | 57% | 1952 fps | 100% |
| IMR 4831 | <<locked>> | 86% | 36,535 psi | 79% | 3051 fps | 95.2% |
| Norma URP | <<locked>> | 86% | 37,927 psi | 82% | 3104 fps | 95.5% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 26,774 psi | 58% | 1995 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 80% | 36,753 psi | 79% | 3143 fps | 99.2% |
| ReloadSwiss RS 62 | <<locked>> | 86% | 37,681 psi | 81% | 3117 fps | 95.1% |
| Rottweil R 903 | <<locked>> | 80% | 37,391 psi | 81% | 3048 fps | 97.5% |
| SNPE Vectan SP 11 | <<locked>> | 80% | 38,392 psi | 83% | 3104 fps | 97% |
| Somchem S355 | <<locked>> | 80% | 38,101 psi | 82% | 3054 fps | 97.5% |
| Somchem S365 | 66.2 gr | 82% | 29,646 psi | 64% | 2904 fps | 95.7% |
| Vihtavuori N150 | <<locked>> | 80% | 36,274 psi | 78% | 2982 fps | 98.3% |
| Vihtavuori N160 | <<locked>> | 84% | 36,970 psi | 80% | 3041 fps | 95% |
| Vihtavuori N550 | <<locked>> | 86% | 39,117 psi | 84% | 3107 fps | 95.6% |
| Vihtavuori N555 | 73.3 gr | 92% | 35,723 psi | 77% | 3091 fps | 95.6% |
| Winchester 6.5 StaBALL | <<locked>> | 80% | 32,169 psi | 69% | 2877 fps | 95.6% |
| Winchester StaBALL HD | <<locked>> | 94% | 31,082 psi | 67% | 3012 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for .30 Super Fl. H&H loaded with the .310 | 123gr | Hornady SP. Alliant Reloder-26 delivers the highest muzzle velocity at 3,294 fps; across all powders the maximum-charge window runs from 2,175 fps to 3,294 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14, Winchester StaBALL HD reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Somchem S365, Vihtavuori N555 rank at the top here: for .30 Super Fl. H&H with the .310 | 123gr | Hornady SP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.