Load data for .30 Super Fl. H&H + .308 | 220gr | Winchester Silvertip

.30 Super Fl. H&H cartridge drawing
Winchester logo

Load Specifications

Bullet Manufacturer:Winchester
Bullet Weight:220 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:6.0

Load data in caliber .30 Super Fl. H&H with .308 | 220gr | Winchester Silvertip bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 76, ReloadSwiss RS 80 and ADI AR 2225.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>82%41,234 psi89%2454 fps99.9%
ADI AR 2213<<locked>>82%40,640 psi88%2520 fps97.6%
ADI AR 2217<<locked>>90%39,378 psi85%2497 fps97.6%
ADI AR 2225<<locked>>94%40,582 psi87%2579 fps99.9%
Alliant Reloder-22<<locked>>82%41,118 psi89%2523 fps98.8%
Alliant Reloder-23<<locked>>82%39,755 psi86%2467 fps100%
Alliant Reloder-25<<locked>>88%41,945 psi90%2572 fps100%
Bofors RP15<<locked>>84%40,915 psi88%2520 fps98.6%
Bofors RP30<<locked>>90%41,626 psi90%2569 fps98.4%
Bofors RP5<<locked>>82%41,118 psi89%2523 fps98.8%
Hodgdon H1000<<locked>>88%40,263 psi87%2516 fps98.4%
Hodgdon Retumbo<<locked>>88%40,872 psi88%2621 fps99.5%
Hodgdon TrailBossᴾ<<locked>>100%37,478 psi81%1677 fps100%
IMR 7828 SSC<<locked>>82%39,334 psi85%2500 fps97.3%
IMR 8133 Enduron<<locked>>96%39,407 psi85%2549 fps97.7%
Lovex S071<<locked>>86%40,248 psi87%2434 fps99.8%
Norma 217<<locked>>96%39,653 psi85%2572 fps99.4%
Ramshot Grand<<locked>>84%41,959 psi90%2569 fps98.4%
Ramshot Magnum<<locked>>86%40,321 psi87%2513 fps99.2%
ReloadSwiss RS 14ᴾ<<locked>>100%38,334 psi83%1716 fps100%
ReloadSwiss RS 76<<locked>>88%40,292 psi87%2605 fps99.9%
ReloadSwiss RS 80<<locked>>90%39,305 psi85%2559 fps96.3%
Vihtavuori N165<<locked>>82%39,523 psi85%2421 fps98.8%
Vihtavuori N565<<locked>>86%40,828 psi88%2526 fps97.4%
Vihtavuori N568<<locked>>90%40,828 psi88%2572 fps96.2%
Winchester StaBALL HD<<locked>>84%39,639 psi85%2575 fps100%
Winchester Supreme 780<<locked>>82%41,684 psi90%2470 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%38,609 psi83%2402 fps99.7%
ADI AR 2213<<locked>>80%38,058 psi82%2464 fps96.8%
ADI AR 2217<<locked>>86%34,534 psi74%2385 fps95.8%
ADI AR 222567 gr82%27,470 psi59%2241 fps95.7%
Alliant Reloder-22<<locked>>80%38,508 psi83%2470 fps98.2%
Alliant Reloder-23<<locked>>80%37,144 psi80%2421 fps100%
Alliant Reloder-25<<locked>>80%32,155 psi69%2359 fps99.2%
Bofors RP15<<locked>>80%35,737 psi77%2408 fps97.3%
Bofors RP30<<locked>>82%31,705 psi68%2346 fps95%
Bofors RP5<<locked>>80%38,508 psi83%2470 fps98.2%
Hodgdon H1000<<locked>>82%32,793 psi71%2343 fps95.8%
Hodgdon Retumbo<<locked>>80%31,401 psi68%2385 fps96.5%
Hodgdon TrailBoss<<locked>>80%28,094 psi61%1493 fps100%
IMR 7828 SSC<<locked>>80%36,651 psi79%2444 fps96.4%
IMR 8133 Enduron<<locked>>90%32,314 psi70%2382 fps95.1%
Lovex S071<<locked>>80%33,272 psi72%2290 fps98.8%
Norma 217<<locked>>86%28,427 psi61%2297 fps95.7%
Ramshot Grand<<locked>>80%36,318 psi78%2448 fps96.7%
Ramshot Magnum<<locked>>80%32,503 psi70%2339 fps97.2%
ReloadSwiss RS 14<<locked>>80%28,761 psi62%1529 fps100%
ReloadSwiss RS 7670 gr80%30,342 psi65%2359 fps97.2%
ReloadSwiss RS 8077.6 gr88%36,492 psi79%2497 fps95.3%
Vihtavuori N165<<locked>>80%37,043 psi80%2372 fps98.2%
Vihtavuori N565<<locked>>82%35,708 psi77%2415 fps95.8%
Vihtavuori N568<<locked>>88%38,072 psi82%2516 fps95.2%
Winchester StaBALL HD<<locked>>80%34,026 psi73%2467 fps100%
Winchester Supreme 780<<locked>>80%38,856 psi84%2418 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .30 Super Fl. H&H loaded with the .308 | 220gr | Winchester Silvertip. Hodgdon Retumbo delivers the highest muzzle velocity at 2,621 fps; across all powders the maximum-charge window runs from 1,677 fps to 2,621 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 81–90 %, leaving at least 10 % headroom. The 220.0 gr projectile in 0.308" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 76, ReloadSwiss RS 80, ADI AR 2225 rank at the top here: for .30 Super Fl. H&H with the .308 | 220gr | Winchester Silvertip they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data