Load data for .30 Super Fl. H&H + .308 | 180gr | Sako Hammerhead

.30 Super Fl. H&H cartridge drawing
SAKO logo

Load Specifications

Bullet Manufacturer:SAKO
Bullet Weight:180 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:15.0

Load data in caliber .30 Super Fl. H&H with .308 | 180gr | Sako Hammerhead bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Hodgdon Retumbo and ReloadSwiss RS 76.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%40,364 psi87%2671 fps98.6%
ADI AR 2209<<locked>>84%39,856 psi86%2690 fps95.8%
ADI AR 2225ᴾ<<locked>>100%39,305 psi85%2762 fps97.9%
Alliant Reloder-19<<locked>>84%39,798 psi86%2687 fps95.9%
Alliant Reloder-22<<locked>>88%40,306 psi87%2743 fps96.3%
Alliant Reloder-23<<locked>>90%41,205 psi89%2753 fps100%
Alliant Reloder-25<<locked>>94%40,785 psi88%2785 fps99.4%
Alliant Reloder-26<<locked>>86%39,871 psi86%2799 fps99.5%
Bofors RP15<<locked>>90%39,958 psi86%2733 fps96%
Bofors RP5<<locked>>88%40,306 psi87%2743 fps96.3%
Hodgdon Hybrid 100V<<locked>>82%40,263 psi87%2654 fps100%
Hodgdon Retumbo<<locked>>94%39,842 psi86%2815 fps96.8%
Hodgdon TrailBossᴾ<<locked>>100%36,753 psi79%1821 fps100%
Lovex S071<<locked>>94%41,785 psi90%2697 fps98.8%
Norma MRP<<locked>>86%39,479 psi85%2756 fps97.5%
Ramshot Magnum<<locked>>92%39,494 psi85%2713 fps96.8%
ReloadSwiss RS 14ᴾ<<locked>>100%37,492 psi81%1864 fps100%
ReloadSwiss RS 76<<locked>>94%39,320 psi85%2799 fps97.8%
Rottweil R 905<<locked>>86%41,742 psi90%2730 fps96.7%
SNPE Vectan Tubal 8000<<locked>>86%41,379 psi89%2723 fps96.6%
Somchem S365<<locked>>82%40,509 psi87%2710 fps100%
Somchem S385<<locked>>84%39,610 psi85%2654 fps96.9%
Vihtavuori N165<<locked>>90%41,727 psi90%2690 fps97.2%
Vihtavuori N555<<locked>>86%40,567 psi87%2723 fps99.8%
Winchester StaBALL HD<<locked>>92%39,523 psi85%2858 fps100%
Winchester Supreme 780<<locked>>88%41,568 psi90%2690 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%30,879 psi67%2448 fps95.6%
ADI AR 2209<<locked>>82%37,434 psi81%2631 fps95%
ADI AR 2225<<locked>>96%34,679 psi75%2641 fps96%
Alliant Reloder-19<<locked>>82%37,246 psi80%2628 fps95%
Alliant Reloder-22<<locked>>86%37,695 psi81%2680 fps95.4%
Alliant Reloder-23<<locked>>80%29,689 psi64%2477 fps98.6%
Alliant Reloder-25<<locked>>84%29,515 psi64%2487 fps95.4%
Alliant Reloder-26<<locked>>80%31,981 psi69%2602 fps97.5%
Bofors RP15<<locked>>88%37,333 psi80%2674 fps95.1%
Bofors RP5<<locked>>86%37,695 psi81%2680 fps95.4%
Hodgdon Hybrid 100V<<locked>>80%37,710 psi81%2605 fps99.9%
Hodgdon Retumbo72.8 gr92%37,333 psi80%2749 fps95.7%
Hodgdon TrailBoss<<locked>>80%27,499 psi59%1627 fps100%
Lovex S071<<locked>>84%30,211 psi65%2428 fps95.3%
Norma MRP<<locked>>82%34,316 psi74%2628 fps95.6%
Ramshot Magnum<<locked>>90%36,695 psi79%2651 fps95.8%
ReloadSwiss RS 14<<locked>>80%28,050 psi60%1667 fps100%
ReloadSwiss RS 7676.2 gr90%34,185 psi74%2661 fps95.5%
Rottweil R 905<<locked>>84%38,986 psi84%2671 fps95.9%
SNPE Vectan Tubal 8000<<locked>>84%38,638 psi83%2664 fps95.7%
Somchem S365<<locked>>80%37,753 psi81%2657 fps100%
Somchem S385<<locked>>80%34,664 psi75%2539 fps95.3%
Vihtavuori N165<<locked>>86%36,593 psi79%2579 fps95.6%
Vihtavuori N555<<locked>>80%33,083 psi71%2552 fps98.6%
Winchester StaBALL HD65 gr80%26,266 psi57%2470 fps98.3%
Winchester Supreme 780<<locked>>86%38,812 psi84%2635 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .308 | 180gr | Sako Hammerhead. Winchester StaBALL HD delivers the highest muzzle velocity at 2,858 fps; across all powders the maximum-charge window runs from 1,821 fps to 2,858 fps. ADI AR 2225 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.308" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Hodgdon Retumbo, ReloadSwiss RS 76 rank at the top here: for .30 Super Fl. H&H with the .308 | 180gr | Sako Hammerhead they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data