Load data for .30 Super Fl. H&H + .308 | 165gr | SUS-TAC HP

.30 Super Fl. H&H cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:165 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:11.0

Load data in caliber .30 Super Fl. H&H with .308 | 165gr | SUS-TAC HP bullet and 31 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>92%39,900 psi86%2753 fps97.4%
Accurate 4350<<locked>>84%41,727 psi90%2812 fps99.1%
Alliant Reloder-16<<locked>>84%40,321 psi87%2818 fps99.1%
Alliant Reloder-23<<locked>>94%40,596 psi87%2844 fps99.9%
Alliant Reloder-25<<locked>>98%40,335 psi87%2861 fps98.2%
Alliant Reloder-26<<locked>>90%39,305 psi85%2884 fps98.6%
Hodgdon H414<<locked>>82%41,002 psi88%2799 fps96.6%
Hodgdon Hybrid 100V<<locked>>86%40,321 psi87%2759 fps99.8%
Hodgdon TrailBossᴾ<<locked>>100%36,274 psi78%1870 fps100%
IMR 4350<<locked>>84%41,075 psi89%2743 fps96%
IMR 4831<<locked>>84%39,958 psi86%2756 fps98.8%
Lovex S065<<locked>>82%41,901 psi90%2743 fps98%
Lovex S070<<locked>>82%40,132 psi86%2723 fps96.6%
Lovex S071<<locked>>98%40,988 psi88%2776 fps97.6%
Norma MRP<<locked>>92%41,974 psi90%2904 fps96.9%
Norma URP<<locked>>84%41,307 psi89%2802 fps98.9%
Ramshot Hunter<<locked>>84%40,074 psi86%2789 fps97.3%
ReloadSwiss RS 14ᴾ<<locked>>100%36,941 psi80%1913 fps100%
ReloadSwiss RS 62<<locked>>84%41,452 psi89%2828 fps98.8%
ReloadSwiss RS 70<<locked>>84%40,379 psi87%2841 fps98.4%
ReloadSwiss RS 76ᴾ<<locked>>100%41,974 psi90%2936 fps97%
Shooters World Long Rifle<<locked>>82%41,901 psi90%2743 fps98%
Shooters World SW4350<<locked>>82%40,132 psi86%2723 fps96.6%
SNPE Vectan Tubal 7000<<locked>>82%41,205 psi89%2687 fps96.7%
Somchem S365<<locked>>86%40,059 psi86%2812 fps100%
Vihtavuori N160<<locked>>82%40,161 psi87%2743 fps98.6%
Vihtavuori N550<<locked>>82%39,566 psi85%2743 fps98.4%
Vihtavuori N555<<locked>>90%39,740 psi86%2808 fps99.2%
Winchester 6.5 StaBALL<<locked>>82%39,291 psi85%2710 fps99.8%
Winchester 760<<locked>>82%41,002 psi88%2799 fps96.6%
Winchester StaBALL HD<<locked>>98%41,568 psi90%2999 fps100%

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%34,969 psi75%2641 fps95.8%
Accurate 4350<<locked>>80%36,318 psi78%2694 fps97.9%
Alliant Reloder-16<<locked>>80%35,491 psi76%2700 fps97.9%
Alliant Reloder-23<<locked>>80%26,020 psi56%2444 fps95.4%
Alliant Reloder-25<<locked>>92%33,475 psi72%2680 fps95.6%
Alliant Reloder-26<<locked>>84%31,763 psi68%2680 fps95.9%
Hodgdon H414<<locked>>80%38,203 psi82%2736 fps95.8%
Hodgdon Hybrid 100V<<locked>>80%32,982 psi71%2592 fps98.5%
Hodgdon TrailBoss<<locked>>80%27,151 psi59%1673 fps100%
IMR 4350<<locked>>82%38,522 psi83%2687 fps95.2%
IMR 4831<<locked>>80%34,940 psi75%2644 fps97.6%
Lovex S065<<locked>>80%39,479 psi85%2690 fps97.5%
Lovex S070<<locked>>80%37,623 psi81%2667 fps95.7%
Lovex S071<<locked>>92%33,721 psi73%2612 fps95.3%
Norma MRP<<locked>>88%36,651 psi79%2776 fps95%
Norma URP<<locked>>80%36,129 psi78%2684 fps97.7%
Ramshot Hunter<<locked>>80%35,012 psi75%2667 fps95.6%
ReloadSwiss RS 14<<locked>>80%27,659 psi60%1713 fps100%
ReloadSwiss RS 62<<locked>>80%35,926 psi77%2703 fps97.5%
ReloadSwiss RS 70<<locked>>80%35,128 psi76%2713 fps96.8%
ReloadSwiss RS 76<<locked>>98%39,117 psi84%2864 fps95.8%
Shooters World Long Rifle<<locked>>80%39,479 psi85%2690 fps97.5%
Shooters World SW4350<<locked>>80%37,623 psi81%2667 fps95.7%
SNPE Vectan Tubal 7000<<locked>>80%38,595 psi83%2631 fps95.9%
Somchem S365<<locked>>80%32,561 psi70%2641 fps99.4%
Vihtavuori N160<<locked>>80%37,594 psi81%2687 fps98.1%
Vihtavuori N550<<locked>>80%37,057 psi80%2687 fps97.8%
Vihtavuori N555<<locked>>80%28,427 psi61%2523 fps95.6%
Winchester 6.5 StaBALL<<locked>>80%36,709 psi79%2654 fps99.5%
Winchester 760<<locked>>80%38,348 psi83%2740 fps95.8%
Winchester StaBALL HD<<locked>>84%26,107 psi56%2530 fps96.2%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 31 powders for .30 Super Fl. H&H loaded with the .308 | 165gr | SUS-TAC HP. Winchester StaBALL HD delivers the highest muzzle velocity at 2,999 fps; across all powders the maximum-charge window runs from 1,870 fps to 2,999 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 31 of the 31 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 165.0 gr projectile in 0.308" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, ReloadSwiss RS 76 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data