Load data for .30 Super Fl. H&H + .308 | 165gr | Brenneke TOG

.30 Super Fl. H&H cartridge drawing
Brenneke logo

Load Specifications

Bullet Manufacturer:Brenneke
Bullet Weight:165 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.0

Load data in caliber .30 Super Fl. H&H with .308 | 165gr | Brenneke TOG bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, ReloadSwiss RS 76 and Alliant Reloder-26.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>90%39,827 psi86%2762 fps97.6%
Accurate 4350<<locked>>82%41,220 psi89%2812 fps99.2%
Alliant Reloder-16<<locked>>82%39,972 psi86%2822 fps99.2%
Alliant Reloder-23<<locked>>92%40,480 psi87%2851 fps99.9%
Alliant Reloder-25<<locked>>96%40,147 psi87%2871 fps98.5%
Alliant Reloder-26<<locked>>88%39,276 psi85%2894 fps98.8%
Hodgdon Hybrid 100V<<locked>>84%40,030 psi86%2762 fps99.8%
Hodgdon Retumbo<<locked>>98%41,916 psi90%2963 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%36,463 psi79%1893 fps100%
IMR 4350<<locked>>82%40,553 psi87%2746 fps96.2%
IMR 4831<<locked>>82%39,508 psi85%2759 fps98.9%
Lovex S071<<locked>>96%40,915 psi88%2785 fps97.9%
Norma MRP<<locked>>90%41,843 psi90%2913 fps97.2%
Norma URP<<locked>>82%40,799 psi88%2802 fps99%
Ramshot Hunter<<locked>>82%39,595 psi85%2789 fps97.4%
ReloadSwiss RS 14ᴾ<<locked>>100%37,130 psi80%1939 fps100%
ReloadSwiss RS 62<<locked>>82%41,075 psi89%2831 fps98.9%
ReloadSwiss RS 70<<locked>>82%39,697 psi86%2841 fps98.5%
ReloadSwiss RS 76<<locked>>98%41,785 psi90%2953 fps97.4%
Somchem S365<<locked>>84%39,987 psi86%2818 fps100%
Somchem S385<<locked>>88%41,989 psi90%2808 fps96.6%
Vihtavuori N165<<locked>>92%41,321 psi89%2782 fps96%
Vihtavuori N550<<locked>>82%41,727 psi90%2802 fps99%
Vihtavuori N555<<locked>>88%39,769 psi86%2818 fps99.3%
Winchester 6.5 StaBALL<<locked>>82%41,408 psi89%2766 fps100%
Winchester StaBALL HD<<locked>>96%41,553 psi90%3012 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>84%32,474 psi70%2585 fps95.1%
Accurate 4350<<locked>>80%38,609 psi83%2756 fps98.7%
Alliant Reloder-16<<locked>>80%37,347 psi80%2762 fps98.7%
Alliant Reloder-23<<locked>>80%27,499 psi59%2507 fps96.7%
Alliant Reloder-25<<locked>>90%33,170 psi71%2687 fps96%
Alliant Reloder-2669.4 gr82%31,575 psi68%2687 fps96.2%
Hodgdon Hybrid 100V<<locked>>80%34,954 psi75%2651 fps99.2%
Hodgdon Retumbo<<locked>>96%39,421 psi85%2897 fps95.1%
Hodgdon TrailBoss<<locked>>80%27,238 psi59%1693 fps100%
IMR 4350<<locked>>80%38,000 psi82%2687 fps95.4%
IMR 4831<<locked>>80%37,072 psi80%2703 fps98.4%
Lovex S071<<locked>>90%33,779 psi73%2621 fps95.6%
Norma MRP<<locked>>86%36,405 psi78%2782 fps95.3%
Norma URP<<locked>>80%38,261 psi82%2746 fps98.5%
Ramshot Hunter<<locked>>80%37,057 psi80%2730 fps96.7%
ReloadSwiss RS 14<<locked>>80%27,746 psi60%1736 fps100%
ReloadSwiss RS 62<<locked>>80%38,348 psi83%2772 fps98.4%
ReloadSwiss RS 70<<locked>>80%37,130 psi80%2779 fps97.8%
ReloadSwiss RS 7679.6 gr94%36,289 psi78%2805 fps95%
Somchem S365<<locked>>80%34,679 psi75%2700 fps99.8%
Somchem S385<<locked>>86%39,320 psi85%2749 fps95.8%
Vihtavuori N165<<locked>>90%38,653 psi83%2726 fps95.2%
Vihtavuori N550<<locked>>80%39,059 psi84%2746 fps98.5%
Vihtavuori N555<<locked>>80%30,356 psi65%2582 fps96.7%
Winchester 6.5 StaBALL<<locked>>80%38,841 psi84%2713 fps99.8%
Winchester StaBALL HD65 gr80%24,294 psi52%2467 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .308 | 165gr | Brenneke TOG. Winchester StaBALL HD delivers the highest muzzle velocity at 3,012 fps; across all powders the maximum-charge window runs from 1,893 fps to 3,012 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 165.0 gr projectile in 0.308" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, ReloadSwiss RS 76, Alliant Reloder-26 rank at the top here: for .30 Super Fl. H&H with the .308 | 165gr | Brenneke TOG they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data