Load data for .30 Super Fl. H&H + .308 | 150gr | Peregrine Plainsmaster (VLR-4)

.30 Super Fl. H&H cartridge drawing
Peregrine logo

Load Specifications

Bullet Manufacturer:Peregrine
Bullet Weight:150 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:11.5

Load data in caliber .30 Super Fl. H&H with .308 | 150gr | Peregrine Plainsmaster (VLR-4) bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Winchester StaBALL HD and Alliant Reloder-23.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%39,044 psi84%2861 fps96.2%
Accurate 4350<<locked>>86%40,814 psi88%2927 fps98.3%
Alliant Reloder-16<<locked>>86%40,059 psi86%2943 fps98.4%
Alliant Reloder-17<<locked>>82%39,929 psi86%2963 fps99.5%
Alliant Reloder-23<<locked>>96%39,900 psi86%2959 fps99.5%
Alliant Reloder-25ᴾ<<locked>>100%39,885 psi86%2972 fps97.2%
Alliant Reloder-26<<locked>>94%41,655 psi90%3064 fps98.5%
Hodgdon Hybrid 100V<<locked>>88%39,784 psi86%2881 fps99.3%
Hodgdon TrailBossᴾ<<locked>>100%35,940 psi77%1969 fps100%
IMR 4831<<locked>>88%41,989 psi90%2933 fps98.6%
Lovex S065<<locked>>84%41,684 psi90%2871 fps97.2%
Lovex S071ᴾ<<locked>>100%39,798 psi86%2877 fps96.5%
Norma URP<<locked>>86%40,785 psi88%2927 fps98.2%
Ramshot Hunter<<locked>>86%39,755 psi86%2910 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%36,477 psi79%2011 fps100%
ReloadSwiss RS 62<<locked>>86%40,843 psi88%2946 fps98%
ReloadSwiss RS 70<<locked>>86%40,205 psi87%2966 fps97.5%
Shooters World Long Rifle<<locked>>84%41,684 psi90%2871 fps97.2%
Somchem S365<<locked>>88%39,305 psi85%2933 fps99.9%
Vihtavuori N150<<locked>>82%41,365 psi89%2848 fps99.9%
Vihtavuori N160<<locked>>84%39,755 psi86%2867 fps97.9%
Vihtavuori N550<<locked>>86%41,916 psi90%2927 fps98.2%
Vihtavuori N555<<locked>>94%41,597 psi90%2982 fps99%
Winchester 6.5 StaBALL<<locked>>84%39,262 psi85%2835 fps99.4%
Winchester StaBALL HDᴾ<<locked>>100%40,930 psi88%3110 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>92%36,448 psi79%2802 fps95.3%
Accurate 4350<<locked>>80%32,895 psi71%2733 fps95.8%
Alliant Reloder-16<<locked>>80%32,895 psi71%2753 fps96%
Alliant Reloder-17<<locked>>80%37,057 psi80%2890 fps98.9%
Alliant Reloder-2364.8 gr86%28,805 psi62%2651 fps95.8%
Alliant Reloder-25<<locked>>96%34,983 psi75%2841 fps95.1%
Alliant Reloder-2672.9 gr88%33,446 psi72%2848 fps95.5%
Hodgdon Hybrid 100V<<locked>>80%30,284 psi65%2641 fps96.7%
Hodgdon TrailBoss<<locked>>80%26,745 psi58%1759 fps100%
IMR 4831<<locked>>80%31,937 psi69%2690 fps95.5%
Lovex S065<<locked>>80%36,651 psi79%2753 fps95.7%
Lovex S071<<locked>>98%37,304 psi80%2822 fps95.6%
Norma URP<<locked>>80%33,315 psi72%2740 fps95.8%
Ramshot Hunter<<locked>>84%37,101 psi80%2844 fps95.3%
ReloadSwiss RS 14<<locked>>80%27,122 psi58%1801 fps100%
ReloadSwiss RS 62<<locked>>80%32,866 psi71%2753 fps95.4%
ReloadSwiss RS 70<<locked>>82%34,882 psi75%2825 fps95.5%
Shooters World Long Rifle<<locked>>80%36,651 psi79%2753 fps95.7%
Somchem S365<<locked>>80%29,762 psi64%2687 fps98%
Vihtavuori N150<<locked>>80%38,725 psi83%2792 fps99.7%
Vihtavuori N160<<locked>>80%34,621 psi75%2743 fps96.3%
Vihtavuori N550<<locked>>80%34,185 psi74%2743 fps95.9%
Vihtavuori N555<<locked>>86%31,589 psi68%2736 fps96%
Winchester 6.5 StaBALL<<locked>>80%34,171 psi74%2713 fps98.4%
Winchester StaBALL HD70 gr88%27,166 psi59%2674 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .30 Super Fl. H&H loaded with the .308 | 150gr | Peregrine Plainsmaster (VLR-4). Winchester StaBALL HD delivers the highest muzzle velocity at 3,110 fps; across all powders the maximum-charge window runs from 1,969 fps to 3,110 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, Lovex S071 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Winchester StaBALL HD, Alliant Reloder-23 rank at the top here: for .30 Super Fl. H&H with the .308 | 150gr | Peregrine Plainsmaster (VLR-4) they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data