Load data for .30 Super Fl. H&H + .308 | 145gr | Prvi Partizan FMJ BT

.30 Super Fl. H&H cartridge drawing
Prvi Partizan logo

Load Specifications

Bullet Manufacturer:Prvi Partizan
Bullet Weight:145 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.0

Load data in caliber .30 Super Fl. H&H with .308 | 145gr | Prvi Partizan FMJ BT bullet and 24 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Winchester StaBALL HD and Vihtavuori N555.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%40,727 psi88%2936 fps96.5%
Accurate 4350<<locked>>84%39,653 psi85%2940 fps97.8%
Alliant Reloder-16<<locked>>86%41,205 psi89%3012 fps98.5%
Alliant Reloder-17<<locked>>82%41,118 psi89%3031 fps99.5%
Alliant Reloder-23<<locked>>96%41,466 psi89%3035 fps99.6%
Alliant Reloder-25ᴾ<<locked>>100%41,365 psi89%3048 fps97.4%
Alliant Reloder-26<<locked>>92%40,219 psi87%3071 fps97.9%
Hodgdon Hybrid 100V<<locked>>88%41,046 psi88%2949 fps99.4%
Hodgdon TrailBossᴾ<<locked>>100%36,100 psi78%2011 fps100%
IMR 4831<<locked>>86%40,785 psi88%2949 fps98.2%
Lovex S065<<locked>>82%40,335 psi87%2881 fps96.6%
Lovex S071ᴾ<<locked>>100%41,640 psi90%2956 fps96.8%
Norma URP<<locked>>84%39,479 psi85%2936 fps97.6%
Ramshot Hunter<<locked>>86%41,017 psi88%2979 fps96.4%
ReloadSwiss RS 14ᴾ<<locked>>100%36,666 psi79%2057 fps100%
ReloadSwiss RS 62<<locked>>84%39,436 psi85%2956 fps97.5%
ReloadSwiss RS 70<<locked>>86%41,350 psi89%3031 fps97.6%
Shooters World Long Rifle<<locked>>82%40,335 psi87%2881 fps96.6%
Somchem S365<<locked>>88%40,770 psi88%3005 fps99.9%
Vihtavuori N160<<locked>>84%41,046 psi88%2936 fps98%
Vihtavuori N550<<locked>>84%40,567 psi87%2936 fps97.7%
Vihtavuori N555<<locked>>92%40,364 psi87%2995 fps98.5%
Winchester 6.5 StaBALL<<locked>>84%40,538 psi87%2904 fps99.5%
Winchester StaBALL HD<<locked>>98%39,682 psi86%3120 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>92%38,145 psi82%2877 fps95.6%
Accurate 4350<<locked>>80%34,577 psi75%2812 fps96.2%
Alliant Reloder-16<<locked>>80%34,011 psi73%2825 fps96.2%
Alliant Reloder-17<<locked>>80%38,450 psi83%2969 fps99.1%
Alliant Reloder-23<<locked>>84%28,224 psi61%2664 fps95.2%
Alliant Reloder-25<<locked>>96%36,332 psi78%2913 fps95.5%
Alliant Reloder-2674.9 gr88%34,882 psi75%2927 fps95.8%
Hodgdon Hybrid 100V<<locked>>80%31,502 psi68%2713 fps97%
Hodgdon TrailBoss<<locked>>80%26,832 psi58%1798 fps100%
IMR 4831<<locked>>80%33,243 psi72%2759 fps95.8%
Lovex S065<<locked>>80%37,956 psi82%2822 fps95.9%
Lovex S071<<locked>>96%36,550 psi79%2838 fps95.1%
Norma URP<<locked>>80%34,563 psi74%2812 fps96%
Ramshot Hunter<<locked>>84%38,406 psi83%2917 fps95.5%
ReloadSwiss RS 14<<locked>>80%27,412 psi59%1844 fps100%
ReloadSwiss RS 62<<locked>>80%34,229 psi74%2825 fps95.7%
ReloadSwiss RS 70<<locked>>82%36,114 psi78%2897 fps95.8%
Shooters World Long Rifle<<locked>>80%37,956 psi82%2822 fps95.9%
Somchem S365<<locked>>80%31,024 psi67%2759 fps98.2%
Vihtavuori N160<<locked>>80%35,955 psi77%2815 fps96.5%
Vihtavuori N550<<locked>>80%35,389 psi76%2812 fps96.1%
Vihtavuori N55565.2 gr84%30,806 psi66%2749 fps95.3%
Winchester 6.5 StaBALL<<locked>>80%35,375 psi76%2782 fps98.5%
Winchester StaBALL HD72 gr88%28,485 psi61%2759 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 50 powders for .30 Super Fl. H&H loaded with the .308 | 145gr | Prvi Partizan FMJ BT. Winchester StaBALL HD delivers the highest muzzle velocity at 3,120 fps; across all powders the maximum-charge window runs from 2,011 fps to 3,120 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 50 of the 50 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 145.0 gr projectile in 0.308" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon H1000, Hodgdon Retumbo reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Winchester StaBALL HD, Vihtavuori N555 rank at the top here: for .30 Super Fl. H&H with the .308 | 145gr | Prvi Partizan FMJ BT they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ADI AR 2209, Alliant Reloder-19, Alliant Reloder-22 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data