Load data for .30 Super Fl. H&H + .308 | 140gr | Peregrine VLR5 (VLR-5)

.30 Super Fl. H&H cartridge drawing
Peregrine logo

Load Specifications

Bullet Manufacturer:Peregrine
Bullet Weight:140 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:12.5

Load data in caliber .30 Super Fl. H&H with .308 | 140gr | Peregrine VLR5 (VLR-5) bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Vihtavuori N555 and Winchester StaBALL HD.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>86%39,305 psi85%2982 fps97.3%
Alliant Reloder-16<<locked>>88%41,220 psi89%3058 fps98.1%
Alliant Reloder-17<<locked>>84%41,220 psi89%3081 fps99.3%
Alliant Reloder-23<<locked>>98%41,075 psi89%3071 fps99.3%
Alliant Reloder-26<<locked>>94%40,045 psi86%3110 fps97.4%
Hodgdon Hybrid 100V<<locked>>90%40,901 psi88%2992 fps99.1%
Hodgdon TrailBossᴾ<<locked>>100%35,607 psi77%2034 fps100%
IMR 4831<<locked>>88%40,495 psi87%2992 fps97.7%
Lovex S065<<locked>>84%40,408 psi87%2930 fps96.2%
Norma URP<<locked>>86%39,262 psi85%2979 fps97.2%
Ramshot Hunter<<locked>>88%41,060 psi88%3028 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%36,085 psi78%2080 fps100%
ReloadSwiss RS 60<<locked>>82%40,959 psi88%3091 fps100%
ReloadSwiss RS 62<<locked>>86%39,189 psi84%2999 fps97%
ReloadSwiss RS 70<<locked>>88%41,510 psi89%3081 fps97.2%
Rottweil R 903<<locked>>82%41,133 psi89%2976 fps99.2%
Shooters World Long Rifle<<locked>>84%40,408 psi87%2930 fps96.2%
Somchem S355<<locked>>82%41,756 psi90%2982 fps99.2%
Somchem S365<<locked>>90%40,437 psi87%3051 fps99.8%
Vihtavuori N150<<locked>>82%39,914 psi86%2907 fps99.6%
Vihtavuori N160<<locked>>86%41,118 psi89%2986 fps97.6%
Vihtavuori N550<<locked>>86%40,364 psi87%2982 fps97.3%
Vihtavuori N555<<locked>>94%39,784 psi86%3031 fps98.1%
Winchester 6.5 StaBALL<<locked>>86%40,756 psi88%2956 fps99.3%
Winchester StaBALL HDᴾ<<locked>>100%39,392 psi85%3156 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>82%33,910 psi73%2844 fps95.4%
Alliant Reloder-16<<locked>>82%34,026 psi73%2871 fps95.7%
Alliant Reloder-17<<locked>>80%35,723 psi77%2943 fps98.1%
Alliant Reloder-23<<locked>>88%29,573 psi64%2753 fps95.4%
Alliant Reloder-2675.9 gr90%34,519 psi74%2959 fps95.1%
Hodgdon Hybrid 100V<<locked>>80%29,153 psi63%2687 fps95.4%
Hodgdon TrailBoss<<locked>>80%26,440 psi57%1821 fps100%
IMR 4831<<locked>>82%32,909 psi71%2799 fps95.1%
Lovex S065<<locked>>82%37,768 psi81%2864 fps95.3%
Norma URP<<locked>>82%34,229 psi74%2851 fps95.4%
Ramshot Hunter<<locked>>86%38,363 psi83%2963 fps95%
ReloadSwiss RS 14<<locked>>80%26,948 psi58%1867 fps100%
ReloadSwiss RS 60<<locked>>80%38,058 psi82%3018 fps99.9%
ReloadSwiss RS 62<<locked>>82%33,866 psi73%2864 fps95%
ReloadSwiss RS 70<<locked>>84%36,114 psi78%2936 fps95.2%
Rottweil R 903<<locked>>80%38,493 psi83%2917 fps98.7%
Shooters World Long Rifle<<locked>>82%37,768 psi81%2864 fps95.3%
Somchem S355<<locked>>80%39,160 psi84%2923 fps98.7%
Somchem S365<<locked>>80%28,543 psi62%2726 fps96.7%
Vihtavuori N150<<locked>>80%37,347 psi80%2848 fps99.3%
Vihtavuori N160<<locked>>80%33,417 psi72%2795 fps95%
Vihtavuori N550<<locked>>82%35,186 psi76%2854 fps95.5%
Vihtavuori N55567.7 gr88%32,300 psi70%2841 fps95.5%
Winchester 6.5 StaBALL<<locked>>80%33,040 psi71%2766 fps97.4%
Winchester StaBALL HD74.5 gr92%29,863 psi64%2848 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .30 Super Fl. H&H loaded with the .308 | 140gr | Peregrine VLR5 (VLR-5). Winchester StaBALL HD delivers the highest muzzle velocity at 3,156 fps; across all powders the maximum-charge window runs from 2,034 fps to 3,156 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.308" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Winchester StaBALL HD reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Vihtavuori N555, Winchester StaBALL HD rank at the top here: for .30 Super Fl. H&H with the .308 | 140gr | Peregrine VLR5 (VLR-5) they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data