Load data for .30 Super Fl. H&H + .308 | 123gr | Nosler Expansion Tip

.30 Super Fl. H&H cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:123 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:13.5

Load data in caliber .30 Super Fl. H&H with .308 | 123gr | Nosler Expansion Tip bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-16, Somchem S365 and Vihtavuori N555.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>82%41,379 psi89%3136 fps100%
Accurate 4350<<locked>>90%40,857 psi88%3182 fps96.5%
ADI AR 2208<<locked>>82%40,814 psi88%3107 fps97%
Alliant Reloder- TS 15.5<<locked>>82%40,350 psi87%3127 fps98.3%
Alliant Reloder-16<<locked>>90%40,553 psi87%3202 fps96.6%
Alliant Reloder-17<<locked>>86%40,451 psi87%3225 fps98.2%
Alliant Reloder-23ᴾ<<locked>>100%39,827 psi86%3199 fps98.1%
Alliant Reloder-26<<locked>>98%41,843 psi90%3304 fps96.4%
Bofors RP3<<locked>>82%40,132 psi86%3127 fps98.4%
Hodgdon Hybrid 100V<<locked>>92%39,755 psi86%3130 fps97.9%
Hodgdon TrailBossᴾ<<locked>>100%35,244 psi76%2162 fps100%
IMR 4831<<locked>>90%39,407 psi85%3127 fps96.1%
Norma URP<<locked>>90%40,901 psi88%3179 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%35,621 psi77%2211 fps100%
ReloadSwiss RS 60<<locked>>84%40,118 psi86%3235 fps99.7%
ReloadSwiss RS 62<<locked>>90%40,828 psi88%3199 fps96.1%
Rottweil R 903<<locked>>84%40,176 psi87%3123 fps98.2%
SNPE Vectan SP 11<<locked>>84%41,698 psi90%3186 fps97.8%
SNPE Vectan Tubal 5000<<locked>>82%40,118 psi86%3012 fps100%
Somchem S355<<locked>>84%41,031 psi88%3130 fps98.1%
Somchem S365<<locked>>92%39,175 psi84%3189 fps99%
Vihtavuori N150<<locked>>86%41,989 psi90%3117 fps99.3%
Vihtavuori N160<<locked>>88%40,030 psi86%3120 fps96%
Vihtavuori N555<<locked>>98%40,973 psi88%3225 fps97.3%
Winchester 6.5 StaBALL<<locked>>88%40,321 psi87%3097 fps98.3%
Winchester StaBALL HDᴾ<<locked>>100%35,781 psi77%3182 fps97.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>80%38,754 psi84%3077 fps99.8%
Accurate 4350<<locked>>88%37,971 psi82%3110 fps95.5%
ADI AR 2208<<locked>>80%38,130 psi82%3038 fps96.1%
Alliant Reloder- TS 15.5<<locked>>80%37,681 psi81%3061 fps97.7%
Alliant Reloder-1668.1 gr88%37,913 psi82%3130 fps95.6%
Alliant Reloder-17<<locked>>80%32,677 psi70%3005 fps95.2%
Alliant Reloder-23<<locked>>94%32,822 psi71%2999 fps95.3%
Alliant Reloder-26<<locked>>96%38,899 psi84%3225 fps95.2%
Bofors RP3<<locked>>80%37,405 psi81%3061 fps97.7%
Hodgdon Hybrid 100V<<locked>>86%32,503 psi70%2936 fps95.4%
Hodgdon TrailBoss<<locked>>80%26,063 psi56%1936 fps100%
IMR 4831<<locked>>88%36,767 psi79%3061 fps95.2%
Norma URP<<locked>>88%38,305 psi83%3117 fps95.4%
ReloadSwiss RS 14<<locked>>80%26,339 psi57%1982 fps100%
ReloadSwiss RS 60<<locked>>80%34,867 psi75%3091 fps98.6%
ReloadSwiss RS 62<<locked>>88%38,043 psi82%3133 fps95.1%
Rottweil R 903<<locked>>80%35,070 psi76%2992 fps96.7%
SNPE Vectan SP 11<<locked>>80%36,216 psi78%3048 fps96.1%
SNPE Vectan Tubal 5000<<locked>>80%37,579 psi81%2956 fps99.9%
Somchem S355<<locked>>80%35,926 psi77%3005 fps96.7%
Somchem S36566.4 gr84%29,747 psi64%2910 fps95.6%
Vihtavuori N150<<locked>>80%34,214 psi74%2930 fps97.6%
Vihtavuori N160<<locked>>86%37,318 psi80%3051 fps95%
Vihtavuori N55573.2 gr94%35,491 psi76%3084 fps95.3%
Winchester 6.5 StaBALL<<locked>>82%32,634 psi70%2894 fps95.7%
Winchester StaBALL HD<<locked>>98%33,344 psi72%3097 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .308 | 123gr | Nosler Expansion Tip. Alliant Reloder-26 delivers the highest muzzle velocity at 3,304 fps; across all powders the maximum-charge window runs from 2,162 fps to 3,304 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 76–90 %, leaving at least 10 % headroom. The 123.0 gr projectile in 0.308" calls for a 1:13.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-16, Somchem S365, Vihtavuori N555 rank at the top here: for .30 Super Fl. H&H with the .308 | 123gr | Nosler Expansion Tip they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data