Load data for .30 Super Fl. H&H + .307 | 150gr | Rhino Penetrator

.30 Super Fl. H&H cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:150 gr
Bullet Diameter:0.307"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:13.0

Load data in caliber .30 Super Fl. H&H with .307 | 150gr | Rhino Penetrator bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Alliant Reloder-26 and Alliant Reloder-23.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%41,234 psi89%2904 fps96.9%
Accurate 4350<<locked>>84%40,089 psi86%2904 fps98.1%
Alliant Reloder-16<<locked>>86%41,568 psi90%2976 fps98.8%
Alliant Reloder-17<<locked>>82%41,553 psi90%2995 fps99.7%
Alliant Reloder-23<<locked>>96%41,713 psi90%2992 fps99.7%
Alliant Reloder-25ᴾ<<locked>>100%41,568 psi90%3009 fps97.8%
Alliant Reloder-26<<locked>>92%40,625 psi88%3035 fps98.2%
Hodgdon Hybrid 100V<<locked>>88%41,481 psi89%2913 fps99.6%
Hodgdon TrailBossᴾ<<locked>>100%36,042 psi78%1972 fps100%
IMR 4831<<locked>>86%41,046 psi88%2907 fps98.4%
Lovex S065<<locked>>82%40,785 psi88%2844 fps97%
Lovex S070<<locked>>84%41,423 psi89%2877 fps96.1%
Lovex S071ᴾ<<locked>>100%41,959 psi90%2920 fps97.1%
Norma URP<<locked>>84%39,842 psi86%2897 fps98%
Ramshot Hunter<<locked>>86%41,307 psi89%2940 fps96.8%
ReloadSwiss RS 14ᴾ<<locked>>100%36,637 psi79%2014 fps100%
ReloadSwiss RS 62<<locked>>84%39,784 psi86%2920 fps97.8%
ReloadSwiss RS 70<<locked>>86%41,698 psi90%2995 fps98%
Shooters World Long Rifle<<locked>>82%40,785 psi88%2844 fps97%
Shooters World SW4350<<locked>>84%41,423 psi89%2877 fps96.1%
Somchem S365<<locked>>88%41,118 psi89%2966 fps100%
Vihtavuori N160<<locked>>84%41,394 psi89%2897 fps98.3%
Vihtavuori N550<<locked>>84%40,814 psi88%2897 fps98%
Vihtavuori N555<<locked>>92%40,770 psi88%2959 fps98.8%
Winchester 6.5 StaBALL<<locked>>84%40,843 psi88%2867 fps99.7%
Winchester StaBALL HD<<locked>>98%40,118 psi86%3087 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>90%35,940 psi77%2782 fps95.2%
Accurate 4350<<locked>>80%34,853 psi75%2779 fps96.6%
Alliant Reloder-16<<locked>>80%34,360 psi74%2792 fps96.7%
Alliant Reloder-17<<locked>>80%38,653 psi83%2927 fps99.3%
Alliant Reloder-2364 gr84%28,471 psi61%2635 fps95.7%
Alliant Reloder-25<<locked>>96%36,550 psi79%2881 fps95.9%
Alliant Reloder-2672 gr86%32,808 psi71%2825 fps95.2%
Hodgdon Hybrid 100V<<locked>>80%31,850 psi69%2680 fps97.4%
Hodgdon TrailBoss<<locked>>80%26,963 psi58%1765 fps100%
IMR 4831<<locked>>80%33,663 psi73%2730 fps96.3%
Lovex S065<<locked>>80%38,174 psi82%2785 fps96.3%
Lovex S070<<locked>>82%38,928 psi84%2822 fps95.3%
Lovex S071<<locked>>96%36,927 psi80%2805 fps95.5%
Norma URP<<locked>>80%34,809 psi75%2772 fps96.4%
Ramshot Hunter<<locked>>82%36,143 psi78%2815 fps95%
ReloadSwiss RS 14<<locked>>80%27,398 psi59%1808 fps100%
ReloadSwiss RS 62<<locked>>80%34,621 psi75%2792 fps96.2%
ReloadSwiss RS 70<<locked>>80%34,011 psi73%2795 fps95.2%
Shooters World Long Rifle<<locked>>80%38,174 psi82%2785 fps96.3%
Shooters World SW4350<<locked>>82%38,928 psi84%2822 fps95.3%
Somchem S365<<locked>>80%31,401 psi68%2726 fps98.6%
Vihtavuori N160<<locked>>80%36,216 psi78%2779 fps96.9%
Vihtavuori N550<<locked>>80%35,665 psi77%2776 fps96.5%
Vihtavuori N555<<locked>>84%31,125 psi67%2717 fps95.8%
Winchester 6.5 StaBALL<<locked>>80%35,592 psi77%2746 fps98.8%
Winchester StaBALL HD69.1 gr86%26,832 psi58%2654 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .307 | 150gr | Rhino Penetrator. Winchester StaBALL HD delivers the highest muzzle velocity at 3,087 fps; across all powders the maximum-charge window runs from 1,972 fps to 3,087 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.307" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, Lovex S071 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Alliant Reloder-26, Alliant Reloder-23 rank at the top here: for .30 Super Fl. H&H with the .307 | 150gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data