Load data for .30 Super Fl. H&H + .306 | 165gr | Reichenberg HDB Univ Swiss

.30 Super Fl. H&H cartridge drawing
Reichenberg logo

Load Specifications

Bullet Manufacturer:Reichenberg
Bullet Weight:165 gr
Bullet Diameter:0.306"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:12.5

Load data in caliber .30 Super Fl. H&H with .306 | 165gr | Reichenberg HDB Univ Swiss bullet and 31 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>92%40,234 psi87%2776 fps97.7%
Accurate 4350<<locked>>84%41,872 psi90%2831 fps99.2%
Alliant Reloder-16<<locked>>84%40,698 psi88%2841 fps99.3%
Alliant Reloder-23<<locked>>94%41,133 psi89%2867 fps100%
Alliant Reloder-25<<locked>>98%40,930 psi88%2894 fps98.6%
Alliant Reloder-26<<locked>>90%39,827 psi86%2910 fps98.9%
Hodgdon H414<<locked>>82%41,234 psi89%2822 fps96.9%
Hodgdon Hybrid 100V<<locked>>86%40,683 psi88%2779 fps99.9%
Hodgdon Superformance<<locked>>82%40,480 psi87%2838 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%36,274 psi78%1886 fps100%
IMR 4350<<locked>>84%41,524 psi89%2769 fps96.4%
IMR 4831<<locked>>84%40,161 psi87%2776 fps99%
Lovex S070<<locked>>82%40,306 psi87%2746 fps96.8%
Lovex S071<<locked>>98%41,147 psi89%2795 fps97.9%
Norma MRP<<locked>>90%39,726 psi86%2867 fps96.4%
Norma URP<<locked>>84%41,626 psi90%2825 fps99.1%
Ramshot Hunter<<locked>>84%40,596 psi87%2815 fps97.6%
ReloadSwiss RS 14ᴾ<<locked>>100%36,883 psi79%1929 fps100%
ReloadSwiss RS 62<<locked>>84%41,800 psi90%2848 fps99%
ReloadSwiss RS 70<<locked>>84%40,770 psi88%2867 fps98.7%
ReloadSwiss RS 76<<locked>>98%39,595 psi85%2897 fps96.5%
Shooters World SW4350<<locked>>82%40,306 psi87%2746 fps96.8%
SNPE Vectan Tubal 7000<<locked>>82%41,321 psi89%2707 fps97%
Somchem S365<<locked>>86%40,538 psi87%2835 fps100%
Somchem S385<<locked>>88%39,987 psi86%2769 fps95.9%
Vihtavuori N160<<locked>>82%40,480 psi87%2766 fps98.8%
Vihtavuori N550<<locked>>82%39,885 psi86%2766 fps98.6%
Vihtavuori N555<<locked>>90%40,132 psi86%2831 fps99.3%
Winchester 6.5 StaBALL<<locked>>82%39,726 psi86%2733 fps99.9%
Winchester 760<<locked>>82%41,437 psi89%2825 fps97%
Winchester StaBALL HD<<locked>>96%39,276 psi85%2963 fps100%

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>86%32,634 psi70%2598 fps95.1%
Accurate 4350<<locked>>80%36,289 psi78%2707 fps98.1%
Alliant Reloder-16<<locked>>80%35,679 psi77%2723 fps98.2%
Alliant Reloder-23<<locked>>80%25,904 psi56%2454 fps95.6%
Alliant Reloder-25<<locked>>92%33,547 psi72%2700 fps96%
Alliant Reloder-26<<locked>>84%31,865 psi69%2700 fps96.2%
Hodgdon H414<<locked>>80%38,638 psi83%2762 fps96.2%
Hodgdon Hybrid 100V<<locked>>80%33,127 psi71%2612 fps98.7%
Hodgdon Superformance<<locked>>80%37,608 psi81%2769 fps95.3%
Hodgdon TrailBoss<<locked>>80%27,064 psi58%1686 fps100%
IMR 4350<<locked>>82%38,798 psi84%2710 fps95.5%
IMR 4831<<locked>>80%34,983 psi75%2657 fps97.8%
Lovex S070<<locked>>80%37,797 psi81%2690 fps96.1%
Lovex S071<<locked>>92%33,823 psi73%2628 fps95.6%
Norma MRP<<locked>>88%37,057 psi80%2802 fps95.4%
Norma URP<<locked>>80%36,434 psi79%2707 fps98%
Ramshot Hunter<<locked>>80%35,360 psi76%2694 fps96%
ReloadSwiss RS 14<<locked>>80%27,514 psi59%1726 fps100%
ReloadSwiss RS 62<<locked>>80%36,216 psi78%2726 fps97.8%
ReloadSwiss RS 70<<locked>>80%35,360 psi76%2733 fps97.1%
ReloadSwiss RS 76<<locked>>96%36,941 psi80%2825 fps95.2%
Shooters World SW4350<<locked>>80%37,797 psi81%2690 fps96.1%
SNPE Vectan Tubal 7000<<locked>>80%38,740 psi83%2651 fps96.2%
Somchem S365<<locked>>80%32,764 psi71%2657 fps99.5%
Somchem S385<<locked>>86%37,304 psi80%2707 fps95%
Vihtavuori N160<<locked>>80%37,739 psi81%2707 fps98.3%
Vihtavuori N550<<locked>>80%37,231 psi80%2707 fps98%
Vihtavuori N555<<locked>>80%28,340 psi61%2533 fps95.7%
Winchester 6.5 StaBALL<<locked>>80%36,985 psi80%2674 fps99.6%
Winchester 760<<locked>>80%38,638 psi83%2762 fps96.2%
Winchester StaBALL HD<<locked>>82%24,366 psi53%2474 fps95.1%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 31 powders for .30 Super Fl. H&H loaded with the .306 | 165gr | Reichenberg HDB Univ Swiss. Winchester StaBALL HD delivers the highest muzzle velocity at 2,963 fps; across all powders the maximum-charge window runs from 1,886 fps to 2,963 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 31 of the 31 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 165.0 gr projectile in 0.306" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data