Load data for .30 Rem. + .308 | 150gr | RWS HIT

.30 Rem. cartridge drawing
RWS logo

Load Specifications

Bullet Manufacturer:RWS
Bullet Weight:150 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.049"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45.8 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:16.0

Load data in caliber .30 Rem. with .308 | 150gr | RWS HIT bullet and 16 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>92%35,273 psi87%2254 fps97.2%
Accurate 2495ᴾ<<locked>>100%33,257 psi82%2293 fps97.1%
ADI AR 2207<<locked>>82%36,332 psi89%2257 fps100%
Alliant AR-Comp<<locked>>94%34,751 psi86%2316 fps99.2%
Alliant Reloder-10x<<locked>>88%36,201 psi89%2283 fps98.5%
Baschieri & Pellagri 106<<locked>>84%35,172 psi87%2185 fps95.7%
Hodgdon TrailBossᴾ<<locked>>100%31,531 psi78%1473 fps100%
IMR 3031<<locked>>96%35,143 psi87%2326 fps96%
IMR 4198<<locked>>86%36,434 psi90%2238 fps99.1%
Norma 200<<locked>>84%36,172 psi89%2267 fps99%
ReloadSwiss RS 14ᴾ<<locked>>100%31,227 psi77%1506 fps100%
SNPE Vectan SP 3<<locked>>86%35,186 psi87%2244 fps96.2%
Vihtavuori N120<<locked>>82%36,564 psi90%2224 fps100%
Vihtavuori N130<<locked>>88%35,143 psi87%2208 fps97.9%
Vihtavuori N133<<locked>>94%36,419 psi90%2241 fps97.2%
Vihtavuori N135ᴾ<<locked>>100%35,679 psi88%2310 fps97.5%

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>86%29,399 psi72%2126 fps95.1%
Accurate 2495<<locked>>96%29,124 psi72%2205 fps95.7%
ADI AR 2207<<locked>>80%33,910 psi84%2211 fps99.9%
Alliant AR-Comp<<locked>>84%25,556 psi63%2083 fps95.8%
Alliant Reloder-10x<<locked>>80%28,384 psi70%2110 fps96.1%
Baschieri & Pellagri 106<<locked>>82%33,112 psi82%2142 fps95%
Hodgdon TrailBoss<<locked>>80%23,119 psi57%1312 fps100%
IMR 3031<<locked>>94%33,228 psi82%2283 fps95.2%
IMR 4198<<locked>>80%30,734 psi76%2116 fps97.7%
Norma 200<<locked>>80%31,981 psi79%2182 fps98.1%
ReloadSwiss RS 14<<locked>>80%23,003 psi57%1345 fps100%
SNPE Vectan SP 3<<locked>>84%32,938 psi81%2195 fps95.4%
Vihtavuori N120<<locked>>80%34,142 psi84%2182 fps100%
Vihtavuori N130<<locked>>80%27,456 psi68%2037 fps95.3%
Vihtavuori N133<<locked>>88%30,530 psi75%2116 fps95.2%
Vihtavuori N135<<locked>>94%29,849 psi74%2182 fps95.4%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 16 powders for .30 Rem. loaded with the .308 | 150gr | RWS HIT. IMR 3031 delivers the highest muzzle velocity at 2,326 fps; across all powders the maximum-charge window runs from 1,473 fps to 2,326 fps. Accurate 2495 gives the best case fill at 100 %, and 16 of the 16 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.308" calls for a 1:16.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data