Load data for .30 Picra + .311 | 190gr | Winchester Silvertip

.30 Picra cartridge drawing
Winchester logo

Load Specifications

Bullet Manufacturer:Winchester
Bullet Weight:190 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):1.291"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:24.23 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:5"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:6.0

Load data in caliber .30 Picra with .311 | 190gr | Winchester Silvertip bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan BA6 1/2, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate 4100*²<<locked>>64%32,648 psi80%1115 fps92.2%
Accurate No. 11 FS*²<<locked>>76%36,593 psi90%1181 fps87.6%
ADI AP 100²<<locked>>68%35,940 psi89%1079 fps100%
Alliant 2400²<<locked>>64%35,853 psi88%1158 fps96.1%
Alliant BLUE DOT²<<locked>>64%33,228 psi82%1099 fps99.3%
Alliant Herco²<<locked>>68%36,419 psi90%1017 fps100%
Alliant Power Pro 300-MP*²<<locked>>68%34,896 psi86%1165 fps90.6%
Baschieri & Pellagri 102 Pistol²<<locked>>72%36,608 psi90%945 fps100%
Hodgdon Clays²<<locked>>68%35,839 psi88%896 fps100%
Hodgdon H110*²<<locked>>68%35,868 psi88%1181 fps90.3%
Hodgdon LilGun*²<<locked>>68%32,401 psi80%1148 fps94.9%
Hodgdon TrailBossᴾ<<locked>>100%28,906 psi71%833 fps100%
Ramshot Enforcer²<<locked>>64%35,824 psi88%1161 fps96.9%
ReloadSwiss RS 14ᴾ<<locked>>100%28,166 psi69%850 fps100%
ReloadSwiss RS 30*<<locked>>84%33,417 psi82%1171 fps92.7%
SNPE Vectan BA6 1/2<<locked>>88%36,318 psi89%1161 fps98.5%
Somchem S265*²<<locked>>76%33,199 psi82%1112 fps88.4%
Vihtavuori 3N38²<<locked>>64%34,621 psi85%1096 fps100%
Vihtavuori N105²<<locked>>64%34,171 psi84%1096 fps100%
Vihtavuori N110<<locked>>80%36,056 psi89%1171 fps96.6%
Vihtavuori N32C Tin Star<<locked>>84%36,695 psi90%899 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate 4100*²<<locked>>60%28,065 psi69%1047 fps89.6%
Accurate No. 11 FS*²<<locked>>72%32,184 psi79%1122 fps85.1%
ADI AP 100²<<locked>>60%28,819 psi71%994 fps100%
Alliant 2400*²<<locked>>60%31,285 psi77%1096 fps94.2%
Alliant BLUE DOT²<<locked>>60%29,225 psi72%1043 fps98.3%
Alliant Herco²<<locked>>60%29,849 psi74%945 fps100%
Alliant Power Pro 300-MP*²<<locked>>60%26,600 psi66%1040 fps85.4%
Baschieri & Pellagri 102 Pistol²<<locked>>60%27,528 psi68%850 fps100%
Hodgdon Clays²<<locked>>60%29,979 psi74%837 fps100%
Hodgdon H110*²<<locked>>64%31,589 psi78%1119 fps87.9%
Hodgdon LilGun*²<<locked>>60%24,091 psi59%1017 fps89.6%
Hodgdon TrailBoss²4 gr60%14,402 psi35%630 fps100%
Ramshot Enforcer²<<locked>>60%31,314 psi77%1099 fps95.1%
ReloadSwiss RS 14²4.1 gr60%14,214 psi35%646 fps100%
ReloadSwiss RS 30*²<<locked>>72%23,598 psi58%1010 fps85.2%
SNPE Vectan BA6 1/2*²9.8 gr60%16,447 psi41%837 fps86%
Somchem S265*²<<locked>>72%29,834 psi73%1063 fps86.4%
Vihtavuori 3N38²<<locked>>60%30,864 psi76%1047 fps100%
Vihtavuori N105²<<locked>>60%29,631 psi73%1040 fps100%
Vihtavuori N110*²<<locked>>60%19,537 psi48%909 fps86%
Vihtavuori N32C Tin Star²<<locked>>60%23,293 psi57%751 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 21 powders for .30 Picra loaded with the .311 | 190gr | Winchester Silvertip. Accurate No. 11 FS delivers the highest muzzle velocity at 1,181 fps; across all powders the maximum-charge window runs from 833 fps to 1,181 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 21 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 69–90 %, leaving at least 10 % headroom. The 190.0 gr projectile in 0.311" calls for a 1:6.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan BA6 1/2, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .30 Picra with the .311 | 190gr | Winchester Silvertip they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4100, Accurate No. 11 FS, Alliant Power Pro 300-MP burn incompletely and react more sensitively to barrel length and temperature. Accurate 4100, Accurate No. 11 FS, ADI AP 100 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data