Load data for .30 Picra + .310 | 155gr | Accurate Molds

.30 Picra cartridge drawing
Accurate Molds logo

Load Specifications

Bullet Manufacturer:Accurate Molds
Bullet Weight:155 gr
Bullet Diameter:0.31"
Bullet Length:<<locked>>
Case Length (l3):1.291"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:24.23 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:5"
Max. allowed Pressure:40,611 psi

Load data in caliber .30 Picra with .310 | 155gr | Accurate Molds bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate 4100*²<<locked>>72%33,779 psi83%1260 fps88.6%
ADI AP 100²<<locked>>72%34,780 psi86%1204 fps100%
ADI APS 450²<<locked>>64%36,680 psi90%1017 fps100%
Alliant 2400*²<<locked>>68%33,301 psi82%1253 fps91.3%
Alliant BLUE DOT²<<locked>>72%34,969 psi86%1257 fps97.8%
Alliant Herco²<<locked>>72%35,302 psi87%1142 fps100%
Alliant RED DOT²<<locked>>64%36,390 psi90%1050 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>76%36,419 psi90%1066 fps100%
Hodgdon Clays²<<locked>>68%33,910 psi84%988 fps100%
Hodgdon LilGun*²<<locked>>76%31,850 psi78%1276 fps90.3%
Hodgdon TrailBossᴾ<<locked>>100%25,962 psi64%909 fps100%
Maxam CSB 1²<<locked>>64%35,346 psi87%1086 fps100%
Ramshot Enforcer*²<<locked>>68%32,460 psi80%1247 fps91.9%
ReloadSwiss RS 14ᴾ<<locked>>100%24,787 psi61%922 fps100%
SNPE Vectan A0²<<locked>>64%35,766 psi88%1125 fps100%
SNPE Vectan BA6 1/2<<locked>>96%35,723 psi88%1293 fps95.7%
SNPE Vectan BA7 1/2²<<locked>>68%36,216 psi89%1184 fps100%
Vihtavuori 3N38²<<locked>>68%34,084 psi84%1224 fps99.6%
Vihtavuori N105²<<locked>>72%34,969 psi86%1250 fps100%
Vihtavuori N110*<<locked>>88%36,419 psi90%1316 fps93.2%
Vihtavuori N32C Tin Star<<locked>>80%35,534 psi88%1004 fps100%
Vihtavuori N350²<<locked>>64%36,361 psi90%1184 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate 4100*²<<locked>>68%29,501 psi73%1194 fps86%
ADI AP 100²<<locked>>60%24,468 psi60%1053 fps99.6%
ADI APS 450²<<locked>>60%32,851 psi81%978 fps100%
Alliant 2400*²<<locked>>60%24,990 psi62%1112 fps85.8%
Alliant BLUE DOT*²<<locked>>60%24,018 psi59%1076 fps92.6%
Alliant Herco²<<locked>>60%25,918 psi64%1020 fps100%
Alliant RED DOT²<<locked>>60%33,098 psi82%1014 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>60%24,308 psi60%922 fps100%
Hodgdon Clays²<<locked>>60%28,166 psi69%919 fps100%
Hodgdon LilGun*²<<locked>>72%27,557 psi68%1204 fps87.3%
Hodgdon TrailBoss²4 gr60%12,227 psi30%682 fps100%
Maxam CSB 1²<<locked>>60%31,647 psi78%1043 fps100%
Ramshot Enforcer*²<<locked>>60%24,395 psi60%1106 fps86.3%
ReloadSwiss RS 14²4.1 gr60%11,850 psi29%692 fps100%
SNPE Vectan A0²<<locked>>60%32,184 psi79%1083 fps100%
SNPE Vectan BA6 1/2*<<locked>>80%22,858 psi56%1079 fps87.7%
SNPE Vectan BA7 1/2²<<locked>>60%29,167 psi72%1096 fps100%
Vihtavuori 3N38²<<locked>>60%26,353 psi65%1106 fps97.5%
Vihtavuori N105²<<locked>>60%23,772 psi59%1079 fps98.7%
Vihtavuori N110*²<<locked>>76%24,772 psi61%1125 fps85.8%
Vihtavuori N32C Tin Star²<<locked>>60%23,380 psi58%856 fps100%
Vihtavuori N350²<<locked>>60%32,010 psi79%1132 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 22 powders for .30 Picra loaded with the .310 | 155gr | Accurate Molds . Vihtavuori N110 delivers the highest muzzle velocity at 1,316 fps; across all powders the maximum-charge window runs from 909 fps to 1,316 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 22 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .30 Picra with the .310 | 155gr | Accurate Molds they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4100, Alliant 2400, Hodgdon LilGun burn incompletely and react more sensitively to barrel length and temperature. ADI AP 100, ADI APS 450, Alliant 2400 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data