Load data for .30 Picra + .309 | 113gr | LEE Mold C309-113-F

.30 Picra cartridge drawing
LEE logo

Load Specifications

Bullet Manufacturer:LEE
Bullet Weight:113 gr
Bullet Diameter:0.309"
Bullet Length:<<locked>>
Case Length (l3):1.291"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:24.23 Grains of Water
Primer Size:Small Pistol (SP)
Barrel Length:5"
Max. allowed Pressure:40,611 psi

Load data in caliber .30 Picra with .309 | 113gr | LEE Mold C309-113-F bullet and 42 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1000²<<locked>>64%34,534 psi85%1250 fps100%
Accurate Solo 1250²<<locked>>68%35,215 psi87%1312 fps100%
Accurate TCM*²<<locked>>68%32,503 psi80%1440 fps88.9%
ADI AP 100<<locked>>80%34,447 psi85%1430 fps99.6%
ADI APS 350²<<locked>>64%34,127 psi84%1158 fps100%
ADI APS 450²<<locked>>68%36,680 psi90%1217 fps100%
ADI AS 30²<<locked>>68%36,579 psi90%1250 fps100%
ADI AS 50N²<<locked>>64%36,448 psi90%1289 fps100%
Alliant BE-86²<<locked>>68%36,521 psi90%1312 fps100%
Alliant BLUE DOT*<<locked>>80%33,852 psi83%1463 fps92.7%
Alliant Green Dot²<<locked>>64%33,620 psi83%1257 fps100%
Alliant Herco<<locked>>80%35,114 psi86%1375 fps100%
Alliant POWER PISTOL²<<locked>>64%32,837 psi81%1434 fps98.9%
Alliant RED DOT²<<locked>>68%35,114 psi86%1247 fps100%
Alliant UNIQUE²<<locked>>68%35,708 psi88%1385 fps100%
Baschieri & Pellagri 100²<<locked>>64%33,765 psi83%1247 fps100%
Baschieri & Pellagri 102 Pistol<<locked>>80%34,156 psi84%1257 fps100%
Hodgdon Clays²<<locked>>64%34,911 psi86%1178 fps100%
Hodgdon TrailBossᴾ<<locked>>100%21,698 psi53%1033 fps100%
Hodgdon Universal²<<locked>>64%36,738 psi90%1342 fps100%
Maxam CSB 1²<<locked>>72%36,361 psi90%1322 fps100%
Maxam CSB 2²<<locked>>64%32,953 psi81%1270 fps100%
Maxam CSB 3²<<locked>>68%36,230 psi89%1296 fps100%
Maxam CSB 4²<<locked>>64%34,476 psi85%1257 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%19,986 psi49%1037 fps100%
ReloadSwiss RS 20²<<locked>>68%35,621 psi88%1368 fps100%
ReloadSwiss RS 24²<<locked>>68%35,215 psi87%1480 fps96.2%
Rottweil P 806²<<locked>>72%36,550 psi90%1480 fps100%
SNPE Vectan A0²<<locked>>68%33,359 psi82%1319 fps100%
SNPE Vectan A1²<<locked>>64%35,317 psi87%1299 fps100%
SNPE Vectan BA 9²<<locked>>64%34,766 psi86%1312 fps100%
SNPE Vectan BA10²<<locked>>64%36,666 psi90%1217 fps100%
SNPE Vectan BA7 1/2²<<locked>>72%33,025 psi81%1371 fps100%
SNPE Vectan BA9 1/2²<<locked>>64%34,925 psi86%1316 fps100%
Somchem MS200²<<locked>>64%32,822 psi81%1319 fps100%
Vihtavuori 3N37²<<locked>>68%35,810 psi88%1421 fps100%
Vihtavuori 3N38<<locked>>80%36,085 psi89%1486 fps97.3%
Vihtavuori N105<<locked>>80%32,938 psi81%1460 fps98.6%
Vihtavuori N32C Tin Star<<locked>>96%36,376 psi90%1217 fps100%
Vihtavuori N340²<<locked>>64%33,199 psi82%1325 fps100%
Vihtavuori N350²<<locked>>72%35,157 psi87%1411 fps100%
Winchester AutoComp ²<<locked>>68%34,229 psi84%1312 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate Solo 1000²<<locked>>60%30,690 psi76%1201 fps100%
Accurate Solo 1250²<<locked>>60%27,760 psi68%1207 fps100%
Accurate TCM*²<<locked>>64%28,152 psi69%1355 fps86%
ADI AP 100*²<<locked>>60%19,493 psi48%1138 fps93.3%
ADI APS 350²<<locked>>60%30,951 psi76%1115 fps100%
ADI APS 450²<<locked>>60%29,907 psi74%1129 fps100%
ADI AS 30²<<locked>>60%30,255 psi75%1168 fps100%
ADI AS 50N²<<locked>>60%33,272 psi82%1247 fps100%
Alliant BE-86²<<locked>>60%29,051 psi72%1214 fps100%
Alliant BLUE DOT*²<<locked>>68%23,322 psi57%1253 fps85.6%
Alliant Green Dot²<<locked>>60%30,589 psi75%1214 fps100%
Alliant Herco²<<locked>>60%20,653 psi51%1129 fps100%
Alliant POWER PISTOL²<<locked>>60%29,008 psi71%1365 fps97.7%
Alliant RED DOT²<<locked>>60%29,573 psi73%1171 fps100%
Alliant UNIQUE²<<locked>>60%28,601 psi70%1276 fps100%
Baschieri & Pellagri 100²<<locked>>60%29,979 psi74%1198 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>60%19,856 psi49%1040 fps100%
Hodgdon Clays²<<locked>>60%31,647 psi78%1135 fps100%
Hodgdon TrailBoss²4 gr60%9,398 psi23%758 fps100%
Hodgdon Universal²<<locked>>60%32,909 psi81%1289 fps100%
Maxam CSB 1²<<locked>>60%26,426 psi65%1184 fps100%
Maxam CSB 2²<<locked>>60%29,283 psi72%1217 fps100%
Maxam CSB 3²<<locked>>60%29,457 psi73%1207 fps100%
Maxam CSB 4²<<locked>>60%31,372 psi77%1217 fps100%
ReloadSwiss RS 14²4.1 gr60%8,775 psi22%755 fps100%
ReloadSwiss RS 20²<<locked>>60%27,775 psi68%1257 fps100%
ReloadSwiss RS 24*²<<locked>>60%26,397 psi65%1316 fps91.8%
Rottweil P 806²<<locked>>60%23,540 psi58%1260 fps98.6%
SNPE Vectan A0²<<locked>>60%26,760 psi66%1220 fps100%
SNPE Vectan A1²<<locked>>60%31,879 psi79%1250 fps100%
SNPE Vectan BA 9²<<locked>>60%31,299 psi77%1263 fps100%
SNPE Vectan BA10²<<locked>>60%33,591 psi83%1178 fps100%
SNPE Vectan BA7 1/2²<<locked>>60%23,322 psi57%1201 fps99.3%
SNPE Vectan BA9 1/2²<<locked>>60%30,589 psi75%1253 fps100%
Somchem MS200²<<locked>>60%29,341 psi72%1266 fps100%
Vihtavuori 3N37²<<locked>>60%27,949 psi69%1299 fps100%
Vihtavuori 3N38*²<<locked>>60%18,811 psi46%1138 fps86.3%
Vihtavuori N105*²<<locked>>60%16,186 psi40%1096 fps86.4%
Vihtavuori N32C Tin Star²5.5 gr60%16,897 psi42%928 fps100%
Vihtavuori N340²<<locked>>60%29,602 psi73%1276 fps100%
Vihtavuori N350²<<locked>>60%24,207 psi60%1227 fps99.9%
Winchester AutoComp ²<<locked>>60%27,325 psi67%1211 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 42 powders for .30 Picra loaded with the .309 | 113gr | LEE Mold C309-113-F. Vihtavuori 3N38 delivers the highest muzzle velocity at 1,486 fps; across all powders the maximum-charge window runs from 1,033 fps to 1,486 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 42 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .30 Picra with the .309 | 113gr | LEE Mold C309-113-F they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate TCM, Alliant BLUE DOT burn incompletely and react more sensitively to barrel length and temperature. ADI APS 350, Baschieri & Pellagri 102 Pistol, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data