top of page

Load data for .30 PICRA + .308 | 220gr | Winchester Silvertip

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 PICRA + .308 | 220gr | Winchester Silvertip

Load Specifications

Bullet:
.308 | 220gr | Winchester Silvertip
Bullet Weight:
220gr | 14.3g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.30 PICRA
Case Length (l3):
1.291" | 32.8mm
Cartridge Length (C.O.L.):
2.169" | 55.1mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
24.2 Grains of Water | 1.57 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B6640_C311

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .30 PICRA with .308 | 220gr | Winchester Silvertip bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
63%
34621
85%
**10
100%
Accurate No. 11 FS
<<locked>>
70%
35041
86%
**22
92%
Alliant BLUE DOT
<<locked>>
63%
35476
87%
**76
100%
Hodgdon H110
<<locked>>
67%
36550
90%
**55
96%
Hodgdon LilGun 👍
<<locked>>
67%
36477
90%
**55
99%
Hodgdon TrailBoss
<<locked>>
93%
27441
68%
**8
100%
ReloadSwiss RS 14
<<locked>>
96%
28224
70%
**4
100%
ReloadSwiss RS 30
<<locked>>
81%
36332
89%
**75
98%
SNPE Vectan BA6 1/2
<<locked>>
82%
35259
87%
**06
100%
Somchem S265
<<locked>>
74%
35447
87%
**06
94%
Vihtavuori N110 👍
<<locked>>
74%
35128
87%
**22
99%
Vihtavuori N32C Tin Star
<<locked>>
73%
35911
88%
**0
100%
Winchester 296
<<locked>>
65%
35563
88%
**58
92%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
32706
81%
**1
100%
[Accurate No. 11 FS]*
<<locked>>
61%
26020
64%
**4
86%
Alliant BLUE DOT
<<locked>>
61%
33533
83%
**56
100%
Hodgdon H110
<<locked>>
61%
29950
74%
**56
92%
Hodgdon LilGun
<<locked>>
61%
29544
73%
**66
97%
Hodgdon TrailBoss
<<locked>>
70%
18811
46%
**6
100%
ReloadSwiss RS 14
<<locked>>
69%
18086
45%
**3
100%
[ReloadSwiss RS 30]*
<<locked>>
61%
19290
47%
**6
87%
SNPE Vectan BA6 1/2
<<locked>>
61%
19580
48%
**3
94%
[Somchem S265]*
<<locked>>
61%
23946
59%
**8
88%
Vihtavuori N110
<<locked>>
61%
23873
59%
**8
95%
Vihtavuori N32C Tin Star
<<locked>>
61%
27862
69%
**8
100%
[Winchester 296]*
<<locked>>
61%
30734
76%
**79
89%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page