Load data for .30 PICRA + .308 | 210gr | CutEdge DGSC

Recommended Powder(s): Accurate No. 9, SNPE Vectan BA6 1/2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 210gr \| CutEdge DGSC
Manufacturer SKU:	DGSC C210
Bullet Weight:	210gr \| 13.6g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.341" \| 34.1mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.172" \| 55.2mm
Seated Depth:	0.460" \| 11.7mm
Shank Seated Depth:	0.460" \| 11.7mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B8495_C311
Last updated:	2025-01-01

Load data for 0 loads in caliber .30 PICRA with .308 | 210gr | CutEdge DGSC bullet and 0 powders such as Accurate No. 9, SNPE Vectan BA6 1/2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36260	89%	**14	100%
Accurate 4100	<<locked>>	73%	35273	87%	**96	95%
[Accurate No. 11 FS]*	<<locked>>	82%	36042	89%	**15	89%
Accurate No. 9	<<locked>>	63%	36332	89%	**89	99%
Alliant 2400	<<locked>>	70%	36056	89%	**02	97%
Alliant BLUE DOT	<<locked>>	73%	36027	89%	**73	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	75%	36172	89%	**9	100%
Hodgdon H110	<<locked>>	78%	36027	89%	**35	93%
Hodgdon LilGun	<<locked>>	79%	35578	88%	**52	98%
Maxam CSB 1	<<locked>>	63%	35128	87%	**3	100%
Ramshot Enforcer	<<locked>>	70%	36289	89%	**15	98%
ReloadSwiss RS 30	<<locked>>	94%	35404	87%	**48	95%
SNPE Vectan A0	<<locked>>	64%	35853	88%	**9	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	96%	35578	88%	**99	99%
SNPE Vectan BA7 1/2	<<locked>>	67%	36245	89%	**4	100%
Somchem S265	<<locked>>	85%	35447	87%	**79	91%
Vihtavuori 3N38	<<locked>>	69%	35520	87%	**43	100%
Vihtavuori N105	<<locked>>	71%	35201	87%	**47	100%
Vihtavuori N110	<<locked>>	87%	35984	89%	**25	98%
Vihtavuori N350	<<locked>>	63%	36289	89%	**4	100%
[Winchester 296]*	<<locked>>	77%	35317	87%	**38	89%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	25817	64%	**9	100%
[Accurate 4100]*	<<locked>>	61%	23931	59%	**5	89%
[Accurate No. 11 FS]*	<<locked>>	69%	22887	56%	**5	80%
Accurate No. 9	<<locked>>	61%	33634	83%	**56	98%
Alliant 2400	<<locked>>	61%	26789	66%	**4	93%
Alliant BLUE DOT	<<locked>>	61%	25353	62%	**8	98%
Baschieri & Pellagri 102 Pistol	<<locked>>	70%	31720	78%	**3	100%
[Hodgdon H110]*	<<locked>>	61%	20117	50%	**9	82%
[Hodgdon LilGun]*	<<locked>>	61%	18550	46%	**9	87%
Maxam CSB 1	<<locked>>	62%	33504	82%	**9	100%
Ramshot Enforcer	<<locked>>	61%	26107	64%	**1	94%
[ReloadSwiss RS 30]*	<<locked>>	70%	17651	43%	**3	80%
SNPE Vectan A0	<<locked>>	60%	32634	80%	**2	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	69%	17216	42%	**0	89%
SNPE Vectan BA7 1/2	<<locked>>	62%	30792	76%	**2	100%
[Somchem S265]*	<<locked>>	66%	20117	50%	**6	80%
Vihtavuori 3N38	<<locked>>	61%	27789	68%	**1	100%
Vihtavuori N105	<<locked>>	60%	24598	61%	**8	100%
[Vihtavuori N110]*	<<locked>>	62%	16433	40%	**3	85%
Vihtavuori N350	<<locked>>	60%	33083	81%	**5	100%
[Winchester 296]*	<<locked>>	65%	23279	57%	**8	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data