Load data for .30 PICRA + .308 | 200gr | Speer TBBC

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 200gr \| Speer TBBC
Manufacturer SKU:	1770
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B6177_C311
Last updated:	2026-02-04

Load data for 48 loads in caliber .30 PICRA with .308 | 200gr | Speer TBBC bullet and 24 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	35128	86%	**24	100%
ADI APS 450	<<locked>>	64%	36477	90%	**3	100%
Accurate 4100	<<locked>>	74%	36390	90%	**25	94%
[Accurate No. 11 FS]*	<<locked>>	83%	35766	88%	**32	87%
Accurate No. 9	<<locked>>	63%	35679	88%	**99	98%
Accurate TCM	<<locked>>	64%	36303	89%	**99	99%
Alliant 2400	<<locked>>	70%	35549	88%	**09	96%
Alliant BLUE DOT	<<locked>>	74%	36477	90%	**93	100%
Alliant Herco	<<locked>>	73%	36260	89%	**1	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	74%	34940	86%	**6	100%
Hodgdon H110	<<locked>>	79%	35969	89%	**48	91%
Hodgdon LilGun	<<locked>>	79%	35070	86%	**65	97%
Maxam CSB 1	<<locked>>	64%	35099	86%	**9	100%
Ramshot Enforcer	<<locked>>	71%	35839	88%	**29	97%
ReloadSwiss RS 30	<<locked>>	96%	36477	90%	**71	94%
SNPE Vectan A0	<<locked>>	64%	35795	88%	**5	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	96%	35346	87%	**15	99%
SNPE Vectan BA7 1/2	<<locked>>	67%	35143	87%	**4	100%
Somchem S265	<<locked>>	86%	35578	88%	**99	90%
Vihtavuori 3N38	<<locked>>	70%	36056	89%	**63	100%
Vihtavuori N105	<<locked>>	73%	35636	88%	**76	100%
Vihtavuori N110	<<locked>>	88%	35505	87%	**32	97%
Vihtavuori N350	<<locked>>	64%	36419	90%	**4	100%
[Winchester 296]*	<<locked>>	79%	36230	89%	**65	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	25976	64%	**5	100%
ADI APS 450	<<locked>>	62%	34708	85%	**7	100%
[Accurate 4100]*	<<locked>>	61%	23801	59%	**1	87%
[Accurate No. 11 FS]*	<<locked>>	71%	24511	60%	**4	80%
Accurate No. 9	<<locked>>	61%	33054	81%	**70	97%
Accurate TCM	<<locked>>	61%	33895	83%	**70	98%
Alliant 2400	<<locked>>	61%	26629	66%	**1	92%
Alliant BLUE DOT	<<locked>>	62%	25831	64%	**5	97%
Alliant Herco	<<locked>>	60%	26803	66%	**6	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	66%	29486	73%	**0	100%
[Hodgdon H110]*	<<locked>>	61%	20363	50%	**2	80%
[Hodgdon LilGun]*	<<locked>>	61%	18695	46%	**5	86%
Maxam CSB 1	<<locked>>	60%	31995	79%	**9	100%
Ramshot Enforcer	<<locked>>	61%	25817	64%	**1	93%
[ReloadSwiss RS 30]*	<<locked>>	72%	19058	47%	**2	81%
SNPE Vectan A0	<<locked>>	61%	32706	81%	**6	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	68%	16578	41%	**3	87%
SNPE Vectan BA7 1/2	<<locked>>	61%	29660	73%	**8	100%
[Somchem S265]*	<<locked>>	68%	21828	54%	**2	80%
Vihtavuori 3N38	<<locked>>	61%	28311	70%	**4	100%
Vihtavuori N105	<<locked>>	61%	24932	61%	**1	100%
[Vihtavuori N110]*	<<locked>>	62%	16491	41%	**3	84%
Vihtavuori N350	<<locked>>	61%	33214	82%	**8	100%
[Winchester 296]*	<<locked>>	66%	24047	59%	**4	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data